Selling my prc stage 2.5 (5.3ltr) heads. They have the prc dual spring kit w/titanium retainers + TR 224 112 lsa. I made great numbers through these heads. Going with a new setup, forged bottm end new cam the works. Will sell heads and cam for $950 plus shipping. Car is currently together (my daily driver) new setup will be in here in two weeks. This is an excellent street killer package. $1638 new

 

any idea what that was on a dynojet?good deal!

 

Will sell cam seperately. The dynojet numbers are a topic of hot debate. Between 430 and 450 I would say.

 

How much for the cam shipped & what are the full specs??

 

How much for the heads shipped?

 

tr 224 112 lsa .563 .563 comes with cam card
shipping was about 61#lbs for the heads last time I shipped heads. Need your zip to get postal charges. USPS parcel post is easiest for me. Somewhere around $65 is what I paid last time. The cam I have no idea of the charge on it but I'm guessing around 20-25 so:



I'd like $750 for the heads shipped and $275 for the cam shipped separately. Straight up to the lower 48. The heads have the prc double spring package and titanium retainers.

 

Mustang dyno graph

 

shipping would be to 64057 Missouri. Are the heads milled? Do you think the heads would fit ith a T-Rex and -2cc valve reliefs? I am getting a new shortblock too!

 

The heads aren't milled at all. Dont know about ptv you should really check it but Thunder might be able to tell you. I would call them and ask. They have the 2.04 and 1.57 valves. I'll do the $750 shipped with insurance and POD.
OR best offer. This is still America

 

t t t

 

t.t.t.

 

cam sold
heads still for sale

 

Damn, I would definitely buy those heads off you, but won't have access to my bank account until 3.5wks from now. DAMMIT! I hate being a college kid, lol

 

They wont be off the car for two weeks anyway. If they are still here you be

 

t.t.t.

 

bump, lot of interest but no one has paid yet. Cam was sold at $250 right away. These heads were hand finished for me by Texas Speed. I was like the 1st person to buy a pair and was promised a really nice set of special heads. I put down very impressive numbers with these heads on a small 224 cam. Same numbers as an FM13 with TEa ported 5.3 ltr heads.
I actualy put better avg numbers up and the fm13 peaked at the same but HP could not match my torque.

 

Sending a pm in a sec...

 

pm's answered

 

Replied, but the tech db crapped out it said. Let me know if you didn't get it.

 

PM sent.