1.8 HS Rockers, 98 Valve Cover Spacers, DS, and Tranny Mount
Thread Starter
TECH Apprentice
iTrader: (5)
Joined: Nov 2001
Posts: 320
Likes: 0
From: Lincoln Nebraska
1.8 HS Rockers, 98 Valve Cover Spacers, DS, and Tranny Mount Folks,
I have the following items for sale:
SOLD!! 1.8 HS rockers, now before you ask me if why they aren't orange its because I was in a hurry to install them and they shipped them before they anodized them for me. (SLP rockers are non-anodized HS rockers). I clearance them to fit on a 98 Head, just a little off the back corners.
$290-shipped
SOLD!!! 1/2" Valve Cover Spacers for 98 heads:
Using aftermarket rockers can pose a clearance problem when they are used with stock valve covers. This is especially true with high-ratio rockers, or shaft-mounted rocker systems. These high quality valve cover spacers are CNC machined from T-6061 billet aluminum and tumble finished for a high quality high-tech appearance. The bolts and gaskets are included however the gaskets are chewed up a little, but still sealed.
$90-shipped
Buy the rockers and valve cover spacers together. $360-shipped.
Aluminum DS
I have an Aluminum driveshaft for sale. Its a stock piece, it has been hand polished a little. The DS has a rear U-joint that can be connected to a 1350 Yoke, (Which was connected to my Moser 12 bolt). Let me know if you have any questions.
$125
No pic, can I get one if you need it.
SOLD!!! Energy Suspension Tranny Mount.
Used about 500 miles to noisy for me.
$25-shipped
I'll throw in the GONE!! 3" cut-out with any item sold if you want it. PayPal only.
Tom
I have the following items for sale:
SOLD!! 1.8 HS rockers, now before you ask me if why they aren't orange its because I was in a hurry to install them and they shipped them before they anodized them for me. (SLP rockers are non-anodized HS rockers). I clearance them to fit on a 98 Head, just a little off the back corners.
$290-shipped
SOLD!!! 1/2" Valve Cover Spacers for 98 heads:
Using aftermarket rockers can pose a clearance problem when they are used with stock valve covers. This is especially true with high-ratio rockers, or shaft-mounted rocker systems. These high quality valve cover spacers are CNC machined from T-6061 billet aluminum and tumble finished for a high quality high-tech appearance. The bolts and gaskets are included however the gaskets are chewed up a little, but still sealed.
$90-shipped
Buy the rockers and valve cover spacers together. $360-shipped.
Aluminum DS
I have an Aluminum driveshaft for sale. Its a stock piece, it has been hand polished a little. The DS has a rear U-joint that can be connected to a 1350 Yoke, (Which was connected to my Moser 12 bolt). Let me know if you have any questions.
$125
No pic, can I get one if you need it.
SOLD!!! Energy Suspension Tranny Mount.
Used about 500 miles to noisy for me.
$25-shipped
I'll throw in the GONE!! 3" cut-out with any item sold if you want it. PayPal only.
Tom
Last edited by BlackWS6LS1; Nov 28, 2006 at 06:05 PM.
