Forged LS6 Motor lotsa goodies
Forged LS6 Motor lotsa goodies *EVERYTHING IS NEW NEVER USED OR INSTALLED a lot of the parts are still in their original boxes*
Aluminum LS6 Block
Stock LS6 Crank
Aluminum LQ9 Heads (6.0L) Ported and Multi Angle Valve Job
Crane Dual Springs 114832-16
Crane Hardened Spring Seats 144460-16
ARP Head Studs 12point 234-4317
ARP Cam Bolts
ARP Flywheel Bolts
Eagle H-Beam Forged Rods
Diamond -8.66cc Dished Forged Pistons with wrist pins and rings
Clevite 77 Hardened Cam Bearings
Clevite 77 Hardened Rod Bearings
Clevite 77 Hardened Main Bearings
Center Bolt (99+) Style Valve Covers (only thing that's used)
The block and crank are GM Surplus it's never been run, same for the heads. The block has been Line Honed, and Bored .005 over. Rotating assembly has been balanced, All that needs to be done is filing the rings and assembly.
I want to sell the entire thing since it's already been machined to work together, for $2600 this is about $3400 worth of parts
I am located about 15 Miles North Of Oklahoma City, Pickup will be the responsibility of the buyer I may be willing to meet within about a 40 to 60 Mile area. Money Order, Cash, or I would accept Paypal with a 3% Buyers fee to keep me from getting raped
Aluminum LS6 Block
Stock LS6 Crank
Aluminum LQ9 Heads (6.0L) Ported and Multi Angle Valve Job
Crane Dual Springs 114832-16
Crane Hardened Spring Seats 144460-16
ARP Head Studs 12point 234-4317
ARP Cam Bolts
ARP Flywheel Bolts
Eagle H-Beam Forged Rods
Diamond -8.66cc Dished Forged Pistons with wrist pins and rings
Clevite 77 Hardened Cam Bearings
Clevite 77 Hardened Rod Bearings
Clevite 77 Hardened Main Bearings
Center Bolt (99+) Style Valve Covers (only thing that's used)
The block and crank are GM Surplus it's never been run, same for the heads. The block has been Line Honed, and Bored .005 over. Rotating assembly has been balanced, All that needs to be done is filing the rings and assembly.
I want to sell the entire thing since it's already been machined to work together, for $2600 this is about $3400 worth of parts
I am located about 15 Miles North Of Oklahoma City, Pickup will be the responsibility of the buyer I may be willing to meet within about a 40 to 60 Mile area. Money Order, Cash, or I would accept Paypal with a 3% Buyers fee to keep me from getting raped
Last edited by Justin98TransAm; Oct 9, 2006 at 09:03 PM.
Are those the correct head bolts for the LS6 block? I know those are the correct ones for the 2004+ LQ4/LQ9 engines. You might want to screw them into the end two head holes and see if they stick up the same height.
BTW, awesome price for some nice parts.
BTW, awesome price for some nice parts.
yes the new style LS6 blocks required the shorter head studs. I bought the wrong ones first 
but these are the correct ones with this package.
There is currently a sale pending.
but these are the correct ones with this package.There is currently a sale pending.
