pass side headlight assembly (black) 170 shipped
(ill include a headlight motor for a total of 200 shipped) HEADLIGHT+MOTOR 180 SHIPPED

98+ rear calipers with new pads and hoses 80 shipped

a/c compressor 75 shipped

AIR PUMP 30 SHIPPED

CUSTOM SPEAKER BOX CUT FOR (2) 12" SUBS
NEVER USED FITS IN THE TRUNK, SITS FLUSH WITH THE TOP OF THE TOP OF THE TRUNK 100 LOCAL PICK UP

CRUISE CONTROL UNIT WITH CABLE 40 SHIPPED

tubular red lower control arms with grease fittings needs new bushings 30 plus shipping


MOSER 12 BOLT from a 98+ f-body (the bigger brakes)
has low mileage, comes complete from rotor to rotor
aluminum T/A cover
3.73 gears
i think its got 33 spline axles
non c clip axles
eaton posi with upgraded carbon fiber clutches
uses stock u joint
i think its 4 channel (its got the plugs at each wheel)
has welded on lower control arm relocation brackets
reason for selling is it whines a little bit (since i bought it) and i want to go with a 9" with 4.10's asking 1800 OBO id like local pickup if possible. its still in my car so i can take someone for a ride if interested SOLD

6spd swap
low mileage 6spd trany
comes with 6spd pedals
slave cylinder
a 400 dollar fidanza aluminum flywheel used one summer
a McLeod street twin clutch used one summer
B&M ripper shifter
white shift **** with built in button
will include top of center council
askin 2200 OBO once again id like local pick up if possible. it is also still in my car so if you want a ride we can arrange it

BUTLER,PA






everything is off an 94 t/a with 30k

 

Damn i want your 12....if i only had 300 more!

 

would you take 1500 for the 12?

 

im pretty firm at 1800. cuz its got the cover and the relocation brackets,and the upgraded diff clutches.

 

everything is obo make some offers!! 12 bolt rear end sale is pending will know by tomm whether or not its sold

 

everything still for sale. bump

 

gees...im in butler but i have to wait a bit to see whats going on with something to see if i will be able to spend the money.

 

Check your PM on the A/C compressor please!

 

JOHN B ended up getting a compressor so its forsale still

 

Hi, I was wondering, what brand are the LCA's, and are they bent / warped at all? plmk

thanks

Mark Jr.

hexhd@aol.com

 

the shape of them are in good condition however the paint is starting to flake from the shitty pa weather

 

Do the rear calipers have the baskets they mount in? If so they are sold.

 

Hi, flakeing paint is no prob w/ me but what brand are they? (LCA's)

Thanks

Mark Jr.

 

im almost positive the lca's are BMR.. the moser12 bolt is sold and gone. everthing else is still fs

 

Hi, plmk how much shipped to 44147 Ohio

Thanks

Mark Jr.
HEXHD@AOL.COM

 

You still have the clutch? PM Me

TKS

 

i still have everything..i dont want to seperate the clutch and flywheel from the trany until there are 2 or 3 of you that want each one

 

Is the compressor in good working order?

Sara Lou

 

Interested in the LT1 Clutch pedals if you will separate.

 

Do you still have the clutch FS??

PM me