FS: 228/228 cam w/ pics
Thread Starter
10 Second Club
iTrader: (21)
Joined: Nov 2001
Posts: 728
Likes: 1
From: Olive Branch MS/Memphis
FS: 228/228 cam w/ pics 228/228 .571"/.571" lift 113 lsa 111 intake centerline (comp's XE lobes)
The cam is used but does not show signs of abnormal wear. I bought this cam as a used low mileage cam from "Next" on this board. I just recently took this cam out my car and put a split duration in its place. The cam is in a box and ready to ship. I ran the times in my signature with this cam and home-ported 6.0L heads + bolt-ons and 3530 lb raceweight. It was a very strong performer with a pretty decent lope to it. I never dynoed the car with this cam but I have included a dyno graph from the previous owner of the cam. His mods are listed on the dyno sheet. I have also included a copy of the original cam card. The cam has the grind numbers engraved on the end as you can see in one of the pictures. Thanks for looking!!!
$280 Shipped OBO to the lower 48
The cam is used but does not show signs of abnormal wear. I bought this cam as a used low mileage cam from "Next" on this board. I just recently took this cam out my car and put a split duration in its place. The cam is in a box and ready to ship. I ran the times in my signature with this cam and home-ported 6.0L heads + bolt-ons and 3530 lb raceweight. It was a very strong performer with a pretty decent lope to it. I never dynoed the car with this cam but I have included a dyno graph from the previous owner of the cam. His mods are listed on the dyno sheet. I have also included a copy of the original cam card. The cam has the grind numbers engraved on the end as you can see in one of the pictures. Thanks for looking!!!
$280 Shipped OBO to the lower 48
