Essentially two of the same car here. Both black with the 93-96 dark gray leather.

I have no headlight pieces, decent stock rims, or dash pads. Only have one GFX piece (driver's I believe)

96 is missing entire front-end and passenger side. LT1/A4, engine has 150,000 miles and ran great, tranny has about 30,000. Looking for $1200 for the engine/tranny combo with everything included to make it run. Not looking to part out the engine. Anything else from the car just ask here and I'll post a price.

95 is missing passenger fender and rear hatch. LT1/M6, both with 112,000 miles. Got the car with a blown opti so I cannot verify the drivetrain. Parting out engine, and looking for $1100 for the entire T56 setup (pedals, etc) in it's unknown state. I have no reason to believe it's broke, but again I can't verify. Anything else post here and I'll post a price.

Check my feedback here, I'm not out to screw anyone.

Kevin D.

 

how much for the rear hatch off the 96?

 

$150 local, $1000 shipped (yes it's that much of a pain in the ***).

Kevin D.

 

Do you have the black plastic bolt covers for the wiper arms? Know what I'm talking about? I need both driver and passanger side. Thanks.

 

I need a rr taillight assembly for a formula?
bmeyerhoff@comcast.net

 

Do you have the brackets that hold the front sway bar to the frame? Not the ones that hold the bushings, but the one between those and the frame.

 

could you double check the gfx for me bro? my buddy really needs a passenger side skirt. thanks man.

 

how much shipped for a passenger taillight? also what condition are they in? thanks

 

Just checked, definitely no passenger side. I've got 1 good and 1 not-so-good drivers side.

Kevin D.

 

From my search it appears the Formula's had the same taillights as the TA's. I've got one passenger side tail that's worth anything. It has a some marks and scratches that could easily be buffed out, but only three little spots that even look like they have separation (the common problem these lights have when the black part pulls away from the lens).

Looking for $60 shipped UPS insured for the light, I have pics if needed. Either Tranny or Coldkillin can just PM and let me know they are interested.

Thanks,

Kevin D.

 

hey you selling the hood off one of those if so how much shipped and what condition is it in??? thanks

 

top dash panels from these cars ? willing to ship them ? what about doorpanels

tehre going into a thirdgen... so you should know if they will be good for that or not... ie if the pad is cracked up near the windsheild i dont care as long as the mounting tabs are good

 

I've got one on the 95. It's the stock TA hood though, no ram-air. No dents that I can remember, but will need paint.

$75 picked up and you're probably looking at $200-300 for shipping/crating.

Kevin D.

 

Top dash panels are junk (I need another myself). I should be able to get a good set of panels out of the two, but I don't have any working switch plates. $150 shipped on the door panels (dark gray leather) if they aren't cracked. This would include the speaker grills, door handles, and handle trim.

Kevin D.

 

You are hijacking my thread, make your own and stay out. I'd expect your posts to be deleted shortly..

And for those even thinking about buying from him, check out this thread showing his true self:

https://ls1tech.com/forums/conversions-swaps/596290-i-need-lt1-ls2-questions-answered-dammit.html