Wiseco 4.030, -25cc, for stock stroke (370),NIB $525.00 +shippingsold
Eagle 4.1 with reluctor wheel installed, NIB, $650.00 +shipping
Manley stainless valves, 2.0 and 1.6, NIB, $150.00 +shipping sold, thanks Mike

 

back to the top.

 

Whats the thickness on the top ring land billy?

 

Mike they are the K392A3, 4.030 bore, 1.304 Comp Ht, 3.62 stroke, -25cc.
I'll have to check on your question.

 

Do you happen to know if stock 5.3l valve seats can be ground for those valve sizes? If so, I may be interested in those valves. Are they a standard SS valve, or do they have the pro-flo taper?

Mike

 

The part numbers for the valves are 11365-8 for the 1.6's and
11360-8 for the 2.0. We have had our machine shop install these valves in 5.3 heads before, so I cant see there being an issue.

 

PM Sent

Mike

 

back to the top

 

bump to the top

 

You have another PM, and a free bump to the top.

Mike

 

do i really want a 4.1 crank? damn that's a good deal too

 

I think you do!!!

 

do $575 for the crank?

are the wiseco pistons setup for 6.098" or 6.125" rods?

 

pass on that price. Its already cheap enough.
Pistons are for 6.125 with a stock stroke.

 

what kind of CR were you going for with those pistons, and at what CC chamber? i tried figuring it with stock L92 chambers but i dont' think my math was right.

if you get a good deal on Wiseco pistons i might just call you about ordering a set of proper ones.

 

62cc = 8.9, 64cc = 8.6, 67cc = 8.5, 68cc = 8.4

 

bump to the top.

 

still have the crank. Come one, someone needs a 418 dont they?

 

why couldnt this be a dam 4in stroke crank!!!! ttt for you