McLeod Billet Master Cylinder w/ McLeod MC rebuild kit.
--The MC is in like NEW condition, was on the car less than 3k miles before I changed to a Textralia clutch(so it had to come off). I would like $215+shipping. +3% if you use paypal SOLD!!


SVO 42lb. (GreenTop) injectors with less than 2k miles on them.
--I installed them on the dyno (Next Level Performance) and have only driven the car while it was being re-tuned here locally. $250+shipping. +3% if you use paypal. SOLD!!


NX 85mm 1 piece Billet Nitrous MAF plate installed but NEVER USED.
--I bought from Nitro Dave without the solenoids since I already had an existing NX kit. So all I needed to do was run the lines to it (but never did after I spun a crank bearing). Included will be my Z06 85mm MAF w/pigtail harness since I had to cut the MAF in half to bolt the billet portion to it. If you go to the link I have provided and then click on the installation instructions, you will see what I mean. I paid $350 for the nitrous plate & $170 for the MAF & harness. I've got $520 in this setup. I'll take $290+shipping. +3% if you use paypal.
http://www.nitrousexpress.com/Pages/gm_1pc_massair.htm




1999 LS1 shortblock w/78k miles (spun crank bearing)
--I will let the shortblock go for $300. For $200 more I will throw in the stock heads w/Z06 springs, stock TB, stock intake, and whatever other miscellanous stuff I have to go with it. (It does not include: front/rear/valley covers or oil pan. $300/500 Pick Up ONLY!!! SOLD!!


Thanks,
Jeff

 

jeff what will you take for tb and intake?

 

Sean,
Hey give me a call. I need some work on the LT1 car to get it back together. We can work out in trade if you want to, on some parts you may need. let me know if your interested in doing that, or just want to buy it straight out?

Thanks,
jeff

 

Bump up for the night crew

 

hey you wouldnt happen to have a wiring harness off that shortblock would ya? pm me if you do!

 

Yup, it's still connected to his car... Bump for a great seller.

 

True, it is still connected to the car.......




--Have a guy coming to look at block tomorrow--sale pending

--Lowered price on the McLeod MC and MC refresh kit.

 

Okay, 1 part left. come on guys, doesnt anyone want an 85mm NX plate system and 85mm MAF to boot?

 

ttt for you ,jeff

 

do you have the stock ls1 oil pan if so please pm me with your price, i need one asap, thanks!