Magnaflow Exhaust, Shiftlight, Chrome z06 wheels, FAST 90mm TB, and more...
Thread Starter
TECH Enthusiast
iTrader: (32)
Joined: Aug 2005
Posts: 638
Likes: 1
From: The great state of Tejas!
Magnaflow Exhaust, Shiftlight, Chrome z06 wheels, FAST 90mm TB, and more... I have quite a few parts that will be sitting around forever, so I figure I might as well post them up for sale...
All of these parts are located in Ft. Worth, TX.
BRAND NEW Autometer shift light: SOLD
This light attaches on the side of an Autometer Tachometer.
Only reason I am selling it is because I went to a Mini Tach Light.
Perfect Condition, Free sticker included.
Used Magnaflow Exhaust and tips: $150 plus shipping
This exhaust came with my car.
It was cut right over the axle and the underside of it is painted black.
I really would prefer to keep this particular sale local, due to the hassle of shipping.
2 used 17 inch Chrome Corvette z06 Motorsport wheels and 265/40/17's: $300 plus shipping
They are 17 x 9.5's.
I am almost 100% positive the offset is +54.
The tires are Goodyear F1's(non run flats, I think) with good treadlife left.
One wheel has a very small scratch from when they mounted them.
I took the best picture of it as I could, it's a really small scratch, but I am being honest about it.
Keep in mind they have been in storage and just need to be washed with water.
I really would prefer to keep this particular sale local, due to the hassle of shipping.
Used FAST 90mm Throttlebody: SOLD
The idle hole has already been drilled by MTI.
If you feel it is too large, it should be a very easy fix with a welder.
The car ran great with this throttlebody, but I am going a different route.
I will be needing my tps sensor for my next setup.
Used White Hurst Quarterstick Shiftknob: $25 plus shipping
A few scuffs, but it is still in good condition.
Brand New Stock fuel rail Adaptor: $10 plus shipping
Never been opened.
This is used to hook a fuel pressure gauge up to stock lsx fuel rails.
All of these parts are located in Ft. Worth, TX.
BRAND NEW Autometer shift light: SOLD
This light attaches on the side of an Autometer Tachometer.
Only reason I am selling it is because I went to a Mini Tach Light.
Perfect Condition, Free sticker included.
Used Magnaflow Exhaust and tips: $150 plus shipping
This exhaust came with my car.
It was cut right over the axle and the underside of it is painted black.
I really would prefer to keep this particular sale local, due to the hassle of shipping.
2 used 17 inch Chrome Corvette z06 Motorsport wheels and 265/40/17's: $300 plus shipping
They are 17 x 9.5's.
I am almost 100% positive the offset is +54.
The tires are Goodyear F1's(non run flats, I think) with good treadlife left.
One wheel has a very small scratch from when they mounted them.
I took the best picture of it as I could, it's a really small scratch, but I am being honest about it.
Keep in mind they have been in storage and just need to be washed with water.
I really would prefer to keep this particular sale local, due to the hassle of shipping.
Used FAST 90mm Throttlebody: SOLD
The idle hole has already been drilled by MTI.
If you feel it is too large, it should be a very easy fix with a welder.
The car ran great with this throttlebody, but I am going a different route.
I will be needing my tps sensor for my next setup.
Used White Hurst Quarterstick Shiftknob: $25 plus shipping
A few scuffs, but it is still in good condition.
Brand New Stock fuel rail Adaptor: $10 plus shipping
Never been opened.
This is used to hook a fuel pressure gauge up to stock lsx fuel rails.
Last edited by Black2001z06; Nov 27, 2006 at 05:16 AM.
Thread Starter
TECH Enthusiast
iTrader: (32)
Joined: Aug 2005
Posts: 638
Likes: 1
From: The great state of Tejas!
Originally Posted by 98camaro1le
where are the scuffs on the shift ****, can u send me some more pics. what does quarter stick mean?
I can take some more pics if you want, but you really can barely see them.
Quarter stick is the shifter I have, but the **** can be used many other shifters.
Launching!
Joined: Aug 2002
Posts: 226
Likes: 0
From: Overland Park, KS
FAST Intake & TB Will you sell everything I need to make the FAST intake work, including the TB? If not, what would I need to make it work. I am a novice mechanically, but an old fart.
It is for a LS1 in a 2000 Firebird Formula.
Do you have anything else, like a Ram Air hood, or roll cage, or headers and ORY?
It is for a LS1 in a 2000 Firebird Formula.
Do you have anything else, like a Ram Air hood, or roll cage, or headers and ORY?
Trending Topics
Thread Starter
TECH Enthusiast
iTrader: (32)
Joined: Aug 2005
Posts: 638
Likes: 1
From: The great state of Tejas!
The FAST 90mm TB will fit your formula, but you will also need to purchase the FAST 90mm intake.
Plenty of the sponsors carry the intakes at good prices.
I can show you where to get just the intake for $740-$750 shipped to your doorstep.
The FAST 90mm TB retails for $479.99 NEW.
I am selling mine for $300.
I have what is listed for sale.
Plenty of the sponsors carry the intakes at good prices.
I can show you where to get just the intake for $740-$750 shipped to your doorstep.
The FAST 90mm TB retails for $479.99 NEW.
I am selling mine for $300.
I have what is listed for sale.
Last edited by Black2001z06; Nov 24, 2006 at 07:32 AM.
