Racing parts for sale
Thread Starter
TECH Junkie
iTrader: (9)
Joined: Jun 2003
Posts: 3,428
Likes: 0
From: Winter Garden, Florida
Racing parts for sale The original buyer backed out on some of these parts so I'm posting them back up for sale.
----------------------------------------------------
The following parts were only run on my car during limited dyno testing. Eveything is basically brand new.
Buyer to pay shipping on any items. These parts will be shipped UPS from zip code 34787. All items are listed with a very low price and these numbers are firm. Serious inquiries should contact me through email at ep@core-fl.com.
NX Gemini Twin Stage 6 perimeter spray plate kit. This kit is brand new and was only used for testing on the dyno. I had this on an Victor Jr intake with a sheet metal elbow on top of it. This setup made monster power!!! Comes with short braided lines from solenoids to plate, solenoids(labels are roughed up some from lines rubbing them), plate, standard jets 50 - 300 hp in 50hp increments PLUS 100 - 500hp jets from the Pro Plate kit. I'm also including gaskets, a 4 corner Edlebrock solenoid stand that mounts under the plate and a set of NX bottle brackets. $295
Pictured below is the plate flowing along with my second stage custom spray bars shown in the center.
FJO Wideband AFR controller - 2 channel controller that can be tied into a nitrous controller and set to shut down the nitrous at any given A/F ratio. Included is the original manual and software. $295 SOLD
1 set of NX direct port rails, red anodized. Retails over $300, selling for $175 SOLD
Looks like this when plumbed by Nitro Dave on a Victor Jr -
I've got 10 sets of NGK R5724-9 plugs that retail for $180 for all. I'm selling these for $100.
Buyer to pay shipping on any item so please don't ask for it for free as these are rock bottom prices.
----------------------------------------------------
The following parts were only run on my car during limited dyno testing. Eveything is basically brand new.
Buyer to pay shipping on any items. These parts will be shipped UPS from zip code 34787. All items are listed with a very low price and these numbers are firm. Serious inquiries should contact me through email at ep@core-fl.com.
NX Gemini Twin Stage 6 perimeter spray plate kit. This kit is brand new and was only used for testing on the dyno. I had this on an Victor Jr intake with a sheet metal elbow on top of it. This setup made monster power!!! Comes with short braided lines from solenoids to plate, solenoids(labels are roughed up some from lines rubbing them), plate, standard jets 50 - 300 hp in 50hp increments PLUS 100 - 500hp jets from the Pro Plate kit. I'm also including gaskets, a 4 corner Edlebrock solenoid stand that mounts under the plate and a set of NX bottle brackets. $295
Pictured below is the plate flowing along with my second stage custom spray bars shown in the center.
FJO Wideband AFR controller - 2 channel controller that can be tied into a nitrous controller and set to shut down the nitrous at any given A/F ratio. Included is the original manual and software. $295 SOLD
1 set of NX direct port rails, red anodized. Retails over $300, selling for $175 SOLD
Looks like this when plumbed by Nitro Dave on a Victor Jr -
I've got 10 sets of NGK R5724-9 plugs that retail for $180 for all. I'm selling these for $100.
Buyer to pay shipping on any item so please don't ask for it for free as these are rock bottom prices.
Last edited by next; Nov 27, 2006 at 05:26 PM.
