FS: Chrome Engine Caps (PS, Oil, Brake, Windshield)

 
Thread Tools
 
Search this Thread
 
Old Nov 26, 2006 | 09:36 PM
  #1  
ellessone's Avatar
Thread Starter
Teching In
iTrader: (1)
 
Joined: Apr 2004
Posts: 33
Likes: 0
Thumbs up FS: Chrome Engine Caps (PS, Oil, Brake, Windshield) Lower price

These are the ones from PFYC.com

They are off my 2001 Camaro SS but can fit a variey of models. They can fit all LS1s, all 1997-2004 C5 Corvettes, and all 2005 C6 (not sure about 2006 C6, not sure why they wouldn't).

Anyway, they are in great shape, no scratches. Again it is the power steering cap, the oil fill cap, the master cylinder brake cap, and windshield reservoir cap. Just to be clear, these slip over your factory screw-on caps, they do not replace them. Pics below

All 4 for 50.00 shipped IN THE US (Lower 48 states only please). Paypal preferred.




Last edited by ellessone; Nov 28, 2006 at 06:56 PM.
Old Nov 27, 2006 | 08:05 AM
  #2  
Runn's Avatar
TECH Fanatic
 
Joined: Aug 2003
Posts: 1,130
Likes: 1
From: Tranås, Sweden
Default

Have any pics of them installed?
Old Nov 27, 2006 | 11:24 AM
  #3  
ellessone's Avatar
Thread Starter
Teching In
iTrader: (1)
 
Joined: Apr 2004
Posts: 33
Likes: 0
Default

Originally Posted by Runn
Have any pics of them installed?
I don't have access to the pics here at my work but will post some good pics tonight (and will PM them to you). Sorry.
Old Nov 27, 2006 | 09:02 PM
  #4  
ellessone's Avatar
Thread Starter
Teching In
iTrader: (1)
 
Joined: Apr 2004
Posts: 33
Likes: 0
Default

Originally Posted by Runn
Have any pics of them installed?
Here are a couple pics



Old Nov 28, 2006 | 09:37 AM
  #5  
Runn's Avatar
TECH Fanatic
 
Joined: Aug 2003
Posts: 1,130
Likes: 1
From: Tranås, Sweden
Default

Ship them to Sweden and they are sold.
Old Nov 28, 2006 | 12:07 PM
  #6  
ellessone's Avatar
Thread Starter
Teching In
iTrader: (1)
 
Joined: Apr 2004
Posts: 33
Likes: 0
Default

Originally Posted by Runn
Ship them to Sweden and they are sold.


intial post has been revised, Sorry Runn
Old Nov 28, 2006 | 02:46 PM
  #7  
Phil8616's Avatar
TECH Regular
iTrader: (11)
 
Joined: Sep 2004
Posts: 411
Likes: 0
From: Texas
Default

Bump for great prices and one hell of a clean engine bay....
Old Nov 28, 2006 | 04:20 PM
  #8  
LOHRTBT's Avatar
TECH Enthusiast
20 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (12)
 
Joined: Dec 2002
Posts: 650
Likes: 0
Default

Hey..Nice lookin!! Question...where did you get the c/f look radiator support cover?
Old Nov 28, 2006 | 04:26 PM
  #9  
3800RS's Avatar
TECH Fanatic
iTrader: (15)
 
Joined: Jan 2005
Posts: 1,474
Likes: 1
From: Long Island, NY
Default

willing to sell me just the washer cap ?
Old Nov 28, 2006 | 06:35 PM
  #10  
ellessone's Avatar
Thread Starter
Teching In
iTrader: (1)
 
Joined: Apr 2004
Posts: 33
Likes: 0
Default

Originally Posted by LOHRTBT
Hey..Nice lookin!! Question...where did you get the c/f look radiator support cover?
If you mean the section under the lid, it was dipped in Carbon Fiber. It was a company that does water transfer printing, so, it wasn't truly C/F, but turned out nice. They did about 6 other engine pieces for me and most of my interior.

Thanks for the compliment!
Old Nov 28, 2006 | 06:36 PM
  #11  
ellessone's Avatar
Thread Starter
Teching In
iTrader: (1)
 
Joined: Apr 2004
Posts: 33
Likes: 0
Default

Originally Posted by 3800RS
willing to sell me just the washer cap ?
Sorry RS, I really can't break these up.
Old Nov 28, 2006 | 06:52 PM
  #12  
SPECIALIZED STAINLESS's Avatar
FormerVendor
iTrader: (15)
 
Joined: Jun 2006
Posts: 2,689
Likes: 0
From: Los Angeles, CA
Default

Sent pm...
Old Nov 29, 2006 | 12:01 PM
  #13  
nhra-trans-am's Avatar
Moderator
20 Year Member
iTrader: (104)
 
Joined: Aug 2005
Posts: 3,256
Likes: 5
From: Orange County, CA
Default

I'll take them. Send me a PM if they haven't sold yet.
 




All times are GMT -5. The time now is 03:03 PM.