320 Gig internal HD Western digital
Thread Starter
TECH Regular
iTrader: (5)
Joined: Mar 2005
Posts: 443
Likes: 0
From: Chicago (Willowbrook), IL
SOLD
Bought it as a clearance item for $183.56, original price was $229.99
It looks like an open box item, but micro center tested it. Was planning on putting it into original Xbox (I'm bad I know) but reconsidered.
Want it gone, asking $110 shipped. That's less than half the price of new, price tag is still on box and I haven't opened it.
Bought it as a clearance item for $183.56, original price was $229.99
It looks like an open box item, but micro center tested it. Was planning on putting it into original Xbox (I'm bad I know) but reconsidered.
Want it gone, asking $110 shipped. That's less than half the price of new, price tag is still on box and I haven't opened it.
Last edited by TryingT/A; Jan 22, 2007 at 02:26 PM.
Thread Starter
TECH Regular
iTrader: (5)
Joined: Mar 2005
Posts: 443
Likes: 0
From: Chicago (Willowbrook), IL
Alright, I opened it up to check, since it was already a returned item, I guess that doesn't matter. Here ya go:
Western Digital Internal HD
8 MB cache
7200 rpm
System Requirements:
-Available 3.5 inch internal drive bay
-CD-rom drive (pc only)
-IDE-ATA interface
Additional requirements for hard drives over 137 GB:
PC:
-Windows XP SP1 or later
-Windows 2000 SP3 or later
-Windows 98SE/ME may require an ULTA ATA controller card with support for drives greater than 137GB
MAC:
-Mac OS X v10.2 or later
-Mac G4 or later (may require additional hardware)
Includes complete illustrated step-by-step instructions, jumpers, screws, and a 40 pin 80-conductor IDE interface cable. Operational and complete, tested by MICRO CENTER
Hope this helps.
Western Digital Internal HD
8 MB cache
7200 rpm
System Requirements:
-Available 3.5 inch internal drive bay
-CD-rom drive (pc only)
-IDE-ATA interface
Additional requirements for hard drives over 137 GB:
PC:
-Windows XP SP1 or later
-Windows 2000 SP3 or later
-Windows 98SE/ME may require an ULTA ATA controller card with support for drives greater than 137GB
MAC:
-Mac OS X v10.2 or later
-Mac G4 or later (may require additional hardware)
Includes complete illustrated step-by-step instructions, jumpers, screws, and a 40 pin 80-conductor IDE interface cable. Operational and complete, tested by MICRO CENTER
Hope this helps.
Trending Topics
hmm tempted...im in the middle of specing out a computer to build so i'll get back to you (my roomy is the computer genious so I gotta see if this would be good for my box). I'll let ya know. It would be shipped to central illinois (61820).

