1999 Camaro conertible. Black on Black. Body damaged front clip. Car is not driveable (easily moveable though, I wont start it since I need a couple pulleys for it and a battery.). Make offer on complete take away.

Couple of tidbits of good stuff:
Fully rebuilt 4L60E in the car. only 2K miles old. upgraded internals and transgo shift kit installed. still has a warranty for I think another 6 months. Rebuilt rear end with 373 set up. Zexel torsen diff. prothane sway bar end links and sway bar mounts. 3inch mandrel midpipe, 3" in and out dynomax muffler, {seperate:I have a few brand new tires for 17" wheels. The wheels can be reformed (black 17" ARs with the Khumo SPT tires. about 95% tread left.} Original silver 5 stars in perfect shape with two good tires at 60% and two at 20%. I have the covers for the convert top. car had a hair under 100K before she crashed. New axle bearings and seals and new pads and rotors all the way around. some front end body parts still good.

OH AND ALSO: not a big deal but has new MSD ignition wires on it.













Another set of wheels I have that came off the car.





two wheels have light dings on them but clean. I have talked to a couple wheel straightener guys and they said it would be minor in cost to straighten them back out.

 

I would like to sell the whole car complete for 4K as is but am entertaining some offers to part out.

 

Is the harmonic balancer cracked? It sure looks like it.

 

that looks like balancer took a hard lick crank might be bent ?

 

you have a message!!!

 

Saint paul, MN

sorry about that. Yes the balancer pulley is cracked but I believe only on the outter lip. not the whole thing.

Ill double check tomorrow

 

Re-checked. The outter section of the pulley is cracked. the inner is still in tact and solid.

ALSO: I will be putting on a hoist at my work for the next couple weeks for those in MN who may want to check it out. I will take some undercarriage photos for people too.

 

pm sent

 

I'm interested in the dash pad if it's not cracked or damaged. That big plastic panel between the windshield and actual dash. Send me a price shipped to 37923 if in good condition. Thanks!

 

glad to see you made it out of there OK. sending a pm.

 

pm sent

 

All pms responded.

I have the photos taken of the undercarriage. I will post them up tonight. Also I rotated the assembly and it goes smooth. No reason to think the crank is bent.

 

I am about to start generating a list of parts to come off the car. I will try to get all those who expressed interest on the list as well as for asking prices and such. I should hopefully have this ready in a couple of days. please be patient. Undercarriage pics to come up shortly.

 

how much for the rear end?

 

seats door panels and steering wheel lsavercool@hotmail.com

 

Photos of entire car now available. I will generate the list of those interested in parts today. Local buyers are welcome to contact me to arrange pick up of parts in St. Paul.

 

Please PM me on the offers. This is the order I received inquiries.
PHOTOS OF EVERYTHING CAN BE ARRANGED. MOST PARTS I HAVE PHOTOGRAPHED AND ONLINE ALREADY.

MNFBODY name unless noted as ls1tech

Droppedbagged72
(11/30) - whole car

Phoenix
(11/30) - rear end

SUPERPOWERS
(12/1) - seats

Droppedbagged72
(12/1) - Engine wiring harness and computer OFFER MADE $1100
Front and rear seats
dash OFFER MADE $300
factory 5 spoke wheels

StyxsZ28
(12/3) - engine tranny, and wiring harness and computer

LT1Powered85Z
(12/3) - whole car

FireBird_Fr3ak
(12/3) - rear end

Phoenix
(12/5) - firebird wheels

daveofhiram
ls1tech (12/3) - whole car

buddyz28
(12/3) - right fog light bracket

78z28kid
(12/4) - whole car

jasonk
ls1tech (12/4) - convert top down cover and bag

V8sonoma
ls1tech (12/5) - motor minus wiring harness and computer shipped

CULATR
ls1tech (12/5) - throttle body and maf

roadtrip120
ls1tech (12/6) - pcm, coil packs, alternator ,bracket, and bolts

Wu6FiRe
ls1tech (12/6) - console lid

ttboydfw
ls1tech (12/6) - psgr side valve cover

greenbereto2
ls1tech (12/6) - black wheels and tires

ZFan88
ls1tech (12/6) - converty top and window (hdraulics for it?)

98-LS1
ls1tech (12/6) - dash pad, plastic panel between dash and windshield shipped

white98
ls1tech (12/9) - rear end

tonic
ls1tech (12/10) - seats, door panels, steering wheel

TopRPM
ls1tech (12/10) - firebird wheels and tires

Mcnasty
mnfbody(12/19) - leather seats

Vents
ls1tech (12/19) - wire harness

30th TA 0219
ls1tech (12/16) - gauge cluster

jsconiers
ls1tech (12/16) - engine brackets, acessories, stock wheels

 

I don't need the hydraulics of the frame. Pretty much just the fabric, and the window should be part of that. Is that doable?

 

I am starting to dissassemble the parts on the car. I wwill post them as they are ready. Monday I should have the tranny motor and a few other interior pieces ready to go and with seperate photos.

 

Yeah should be. I am starting on taking the car a part this weekend. I will try to get that done as well as the rest.