FS: Nitrous Stuff, Wheels, HPP3, etc...
Thread Starter
Joined: May 2006
Posts: 536
Likes: 0
From: Hinesville, GA
FS: Nitrous Stuff, Wheels, HPP3, etc... PICS ON POST #11
1998 LS1 HPP3 Used on SS, and will
be set back to stock when sold $155 + Shipping
NOS Power Shot Purge Kit $100 + Shipping Sold
Dynotune Wet Kit including;
10lb. Bottle, Bottle Brackets, Blow Down Tube, Window Switch,
Both Fuel and Nitrous Solenoids, Nitrous Outlet Single Stage
Throttle Body Spacer & Delivery Plate, All Lines, Fuel Pressure Safety Switch,
In-Line Fuse, Relay, and a Bag Full of Jets for up to 200 Shot.
$450 + Shipping Sold
2 Stock Z28 Salad Shooter Wheels $75 + Shipping
Bottle Heater $30 SOLD
All Reasonable Offers Accepted, and possible trades on CAM, Springs, Double Timing Chain, Oil Pump???
1998 LS1 HPP3 Used on SS, and will
be set back to stock when sold $155 + Shipping
NOS Power Shot Purge Kit $100 + Shipping Sold
Dynotune Wet Kit including;
10lb. Bottle, Bottle Brackets, Blow Down Tube, Window Switch,
Both Fuel and Nitrous Solenoids, Nitrous Outlet Single Stage
Throttle Body Spacer & Delivery Plate, All Lines, Fuel Pressure Safety Switch,
In-Line Fuse, Relay, and a Bag Full of Jets for up to 200 Shot.
$450 + Shipping Sold
2 Stock Z28 Salad Shooter Wheels $75 + Shipping
Bottle Heater $30 SOLD
All Reasonable Offers Accepted, and possible trades on CAM, Springs, Double Timing Chain, Oil Pump???
Last edited by 98SS1LWEE; Dec 31, 2006 at 05:03 PM. Reason: Sold Items
Thread Starter
Joined: May 2006
Posts: 536
Likes: 0
From: Hinesville, GA
Originally Posted by zspot98
Do you have just the Nitro Dave plate? If so would you sell it seperatley?
Would sell plate seperately , will be puting on ebay on monday if kit is not sold together first
Is the nitrous kit complete and does it include everything needed to run it?
Is all wiring included?
Is a WOT switch included?
What brand is the bottle heater? Pressure or temperature controlled?
Is a nitrous pressure gauge included?
What brand is the window switch?
What brand is the fuel pressure safety switch? Is it adjustable?
Is all wiring included?
Is a WOT switch included?
What brand is the bottle heater? Pressure or temperature controlled?
Is a nitrous pressure gauge included?
What brand is the window switch?
What brand is the fuel pressure safety switch? Is it adjustable?
Trending Topics
Thread Starter
Joined: May 2006
Posts: 536
Likes: 0
From: Hinesville, GA
Kit is complete, WOT switch is not needed, the Window switch is a dynotune window switch, and will hook up to the blue wire from your throttle position sensor so no need for wide open throttle switch, no gauge, sorry, fpss came form dynotune kit as well, not sure on adjustability??? Bottle heater is dynotune also. you will have to fill the bottle to run the kit, and maybe buy some extra wire to run to your switches and bottle heater and stuff, but that's it. I had the kit installed in less than two hours
Thread Starter
Joined: May 2006
Posts: 536
Likes: 0
From: Hinesville, GA
Cell Phone Pics, but they're coming
Here's pics of purge, i have button also, just ogtta take out of car
Solenoids with lines to plate and from fuel rail
Nitrous line from bottle to Engine, still in car, will pull tom.
Bottle heater, down tube, bottel, plate
Window switch is same as on dynotune website if want to look up, at buddy's house right this minute, gotta go pick up, car's been down for fuel pump and expectant cam. pics of hpp3, wheels coming tom.
Here's pics of purge, i have button also, just ogtta take out of car
Solenoids with lines to plate and from fuel rail
Nitrous line from bottle to Engine, still in car, will pull tom.
Bottle heater, down tube, bottel, plate
Window switch is same as on dynotune website if want to look up, at buddy's house right this minute, gotta go pick up, car's been down for fuel pump and expectant cam. pics of hpp3, wheels coming tom.
Last edited by 98SS1LWEE; Dec 30, 2006 at 07:55 PM. Reason: More Content
I was interested in the whole kit but you split it apart before I got back to you 
. Also, that bottle heater should have been worth way more than $30! I would consider the rest of the kit but a new bottle heater is at least $100-$150.
. Also, that bottle heater should have been worth way more than $30! I would consider the rest of the kit but a new bottle heater is at least $100-$150. 