Update: This ad is very old. I will post a new one in a few weeks.

Updated: sold + prices

Ok, I don't have my own digital camera, so I had to borrow one to take pictures. I have some stuff at home and some at the warehouse where I'm working on my car. I didn't get any pics of the stuff at home, but I will do my best to get some up asap.

All prices INCLUDE shipping (except as noted below)

If you don't like a price, pm me an offer.

I have the following LS1 parts for sale:

• SOLD USED c5 oil pan, windage tray, and pickup tube
• SOLD USED stock ls1 intake manifold (from corvette, NOT LS6)
• $10 USED stock LS1 coolant crossover pipes (NOT LS6)
• $35 USED stock c5 exhaust manifolds (from a 2000 corvette)
• $420 NEW Professional Products Typhoon POLISHED intake manifold (LS1 version)
• SOLD USED c5 AC stuff (compressor, bracketry, etc) - see pic
• $30 USED stock c5 motor mount pedestals
• SOLD USED stock 26lb injectors
• $315 USED Spec 3 Clutch w/steel flywheel with NEW friction disc

I have the following stuff from my old Pontiac 400 motor. When I bought the car (which is now getting a LS1/T56 swap), the engine was running and the tranny shifted. It made a hell of a lot of smoke because the guy said it had a blown head gasket. Looks like he was right. Anyway, when I pulled it out, i forgot about one bolt and I broke the transmission housing (TH-350), so I guess I ruined a perfectly good transmission. The engine and tranny are FREE to any one who can pick it up. Hopefully you can use the parts that are still good. I am pretty sure the internals are fine for both. For the motor, I know for sure the distributor is broken (during transport) and alternator bracket is bent badly. The transmission's case is broken (as noted above). I can deliver for a $1/mile (gas and my time).

The following parts (from the motor) should be plenty good and are for sale (not free):

• $75 USED Edelbrock Torker II intake manifold (I think the guy spray painted this silver, don't know why)
• $150 USED Edelbrock Webber carburetor (was with Torker II, package?)

I am located in Alexandria, VA 22302. PM will get me fastest. I accept paypal if you add 3%.

Pics are all at http://people.virginia.edu/~jcy6h/for_sale/
Here are a few:

 

bump. offers?

 

up top

 

bump it

 

pm sent

 

I will give you $100 for the C5 oil pan assy as pictured with tray and pickup.Ready to pay,paypal if you like.

 

sending you a pm.

 

back to you,wish you were closer,I would be all over the pontiac stuff ! You wouldnt happen to need any 1st gen firebird parts ?

 

nah, working on a 2nd gen

 

to the top.

 

What year Pontiac 400 motor and tranny??

 

motor is a 73 400cid block with 77 6x heads. tranny, i don't know. probably original to the 77 firebird it came out of. firebird originally had a 350 pontiac.

 

Okay thanks, I appreciate the info.

 

Will you do 65 shipped on the intake? zip is 37323

 

what mm throttle body is the intake set up for "typhoon"

 

its the ls1 version for 85mm tb and ls1 injectors.

 

never heard back on the oil pan,where are we at ?Thanks !

 

i need to measure it to see what the shipping is gonna cost. also have some other interest in it.

 

I'll take the manifold, sending pm...

 

bump!