I have 2 engines one is an ls1 I originally bought bought but two cylinders have no compression the rest were 190. The Ls1 had some gunk of rust on the bottom end but I cleaned it out. I started it up and it had awesome oil pressure and no rod knock whatsoever (35-40psi at idle). I would actually be using the motor if it weren't for the crack in the block, so not worth rebuilding. This is where the LS6 comes in, I bought an ls6 longblock with about 20 hours of use on it and selling the misc. things I don't need.

Everything is Best offer dont be shy to make an offer.
New lowered prices


As for the Ls1 everything is for sale. It is a 2002 LS1 w/48k miles.

2002 LS1:

-241 Heads assembled 140 shipped obo MAKE OFFER Needs rocker rebuilld, found needle bearings in oil pan yesterday. 1-17-2007
-LS2 spark plug wire w/shields(90 degree bend on plug boot) 35 shipped - like new just used on my shakedown runs for my ls1-rx7


For the 2004 LS6/cts-v parts was told it had 20 hours of race use: Was used in an SCCA z06.

-Ls6 throttle body fly by wire - 90 shipped obo Make OFFER!
-Ls6 flywheel w/bolts barely needs resurfacing - 80 shipped obo MAKE OFFER just sitting around

-2004 ls6 cam - pristine condition testing waters looking to see what offers it can get. Most likely keeping it for now.

If you have any questions by all means shoot them my way. My paypal is RiceKilla7@hotmail.com verified. Will update the LS1 parts when I take the motor out of the car.


Pic of LS6

Ls6 flywheel with bolts also with just hours of use

TB with mere hours of use

 

ttt Throw offers.

 

ill take the LS6 Manifold shiped for $300 let me know

 

I have someone sending 330 shipped, hasn't sent the money as of yet.

 

I am interested in the LS6 intake. How much? CAll at 772-607-2303

 

Ls6 intake sold!

 

What can you do for the heads?

 

How much do you want for the LS1 engine complete?

 

PMs sent!

 

Send offers, and PMs.

 

PM sent!

 

PM replied, coil packs SOLD!

 

Ls6 throttle body is just asking to be bought!

 

Sent PM regarding a few items I am interested in purchasing.

Thanks, Perry

 

PM sent

Block with internals pending.

Heads pending.

Water pump pending.

 

Nothings final yet.

First with money gets the stuff.

Just added 15 ls6 valve springs, and also ALL ls6 pushrods(visually they all looked good).

 

I want the vally pan and associated pvc parts,

 

They are being sold along with the block and internals.


Also testing waters on the ls6 cam, pristine condition. Just wondering what kind of offers it can fetch.

 

No one has sent money for anything, keep sending PM's.

This stuff is just sitting around.

 

still available!