New 383 Stroker Motor For Sale!
Thread Starter
Staging Lane
Joined: Dec 2005
Posts: 91
Likes: 0
From: Orlando FL.
SOLD!!!!! New 383 Stroker Motor For Sale! SOLD! I have a New Sportsman Series 383 Stroker Motor for sale. It's a Complete short block that needs a good home. I had it Built by Wheeler Power Products in Jacksonville FL. for $3,300.oo . I have been slowly selling my projects and am now down to just an Engine (had a 79 Camaro, and a 85 Camaro but now they are gone 
). I Have not even touched it yet, it's still got the bag it came with on. It's internally balanced and all Forged with Wheeler claiming 500+HP if you were to put CNCed Heads on it (Wheeler claims that this engine, a complete turn key from them will have 540HP). Engine is a 4 BLT.main with Nodular caps and full race prepped blueprinting. Eagle 4130 Crankshaft, 4340 H-Beam Rods, Forged pistons, and fully balanced Assembly. 7" internal race balancer, Billet Double Roller Timing Chain with Torrington Bearing, and a Comp Cams Solid Roller camshaft. I shall also include an enigine stand for the Buyer if they want it. Any questions, just ask. I may be willing to transport the engine to the buyers house if it's not to far out of the way. $2,900 OBO.
CAM SPECS below................
Intake , Exhaust
Gross Duration= 520 , 540
Intake , Exhaust
Duration= 236 , 242
Lobe Seperation= 110.0
.................................................. ...............................................
11 to 1 Compression Ratio with 64cc Heads.
.................................................. ...............................................
And it's a 2 piece RMS.
). I Have not even touched it yet, it's still got the bag it came with on. It's internally balanced and all Forged with Wheeler claiming 500+HP if you were to put CNCed Heads on it (Wheeler claims that this engine, a complete turn key from them will have 540HP). Engine is a 4 BLT.main with Nodular caps and full race prepped blueprinting. Eagle 4130 Crankshaft, 4340 H-Beam Rods, Forged pistons, and fully balanced Assembly. 7" internal race balancer, Billet Double Roller Timing Chain with Torrington Bearing, and a Comp Cams Solid Roller camshaft. I shall also include an enigine stand for the Buyer if they want it. Any questions, just ask. I may be willing to transport the engine to the buyers house if it's not to far out of the way. $2,900 OBO.CAM SPECS below................
Intake , Exhaust
Gross Duration= 520 , 540
Intake , Exhaust
Duration= 236 , 242
Lobe Seperation= 110.0
.................................................. ...............................................
11 to 1 Compression Ratio with 64cc Heads.
.................................................. ...............................................
And it's a 2 piece RMS.
Last edited by JAMcamaro; Feb 28, 2007 at 05:13 AM.
Thread Starter
Staging Lane
Joined: Dec 2005
Posts: 91
Likes: 0
From: Orlando FL.
Intake , Exhaust
Gross Duration= 520 , 540
Intake , Exhaust
Duration= 236 , 242
Lobe Seperation= 110.0
.................................................. ...............................................
11 to 1 Compression Ratio with 64cc Heads.
.................................................. ...............................................
And it's a 2 piece RMS.
Hope this helps.
Gross Duration= 520 , 540
Intake , Exhaust
Duration= 236 , 242
Lobe Seperation= 110.0
.................................................. ...............................................
11 to 1 Compression Ratio with 64cc Heads.
.................................................. ...............................................
And it's a 2 piece RMS.
Hope this helps.
Last edited by JAMcamaro; Feb 24, 2007 at 06:59 AM.
