FS: 408 Stroker Parts
Thread Starter
TECH Enthusiast
iTrader: (6)
Joined: May 2005
Posts: 687
Likes: 0
From: Greenville, SC
FS: 408 Stroker Parts Looking to build a 408 Stroker for cheap but, with some of the best parts? I got you covered!
I am selling all the following for 408 Stroker motor parts:
- Livernois 408 Stroker Rotating Assembly Low Compression for F.I.
- 2002 GM LQ9 6.0 Complete Short Block (no heads or intake)
- Misc. Parts & Brackets off the block and water pump
- All bolts from the parts above tagged and bagged
- SLP Timing Chain SOLD
- SLP Oil Pump SOLD
The whole Package for $2,600 !!!! plus freight of $290-400…
Just the Rotating Assembly for $1,850 !!!!! Plus Shipping $150 due to the weight…
Just the Block and other parts for $600 !!!! Plus freight of $290-400...
Payment Options
Rotating Assembly or the Whole Package
Full Payment 100% Cash or Cashiers/Bank Check
Split Payment 50% Cash or Cashiers/Bankers check and 50% Paypal including Credit Cards!
For the Block and other Parts
Full Payment 100% of it as Cash, Cashier/Banker Check or Paypal!
Shipping Options
I am Located in the Northern Area of Orlando, Florida.
1 - Would prefer local Pick Up and if you do the local Pick up, I will throw in a brand new Motor stand and a 2-ton Motor Hoist for free if you can fit them in your truck!
2 - I will deliver with in 100 miles of Orlando Florida but, I don’t have room in my truck for the Hoist so you will only get the motor Stand for free. That means you will need a hoist (or a bunch of friends) at your location to unload the motor from my truck.
3 - If you want to have it shipped you will pay for those costs, I have a small skid to ship the Block on and can pack the other parts up to go with it.
Selling Reason
My reason for selling is simple, my truck runs great and I am not going to be pushing it any harder. That means that I have no need for these parts so, great deal for you!
I am selling all the following for 408 Stroker motor parts:
- Livernois 408 Stroker Rotating Assembly Low Compression for F.I.
- 2002 GM LQ9 6.0 Complete Short Block (no heads or intake)
- Misc. Parts & Brackets off the block and water pump
- All bolts from the parts above tagged and bagged
- SLP Timing Chain SOLD
- SLP Oil Pump SOLD
The whole Package for $2,600 !!!! plus freight of $290-400…
Just the Rotating Assembly for $1,850 !!!!! Plus Shipping $150 due to the weight…
Just the Block and other parts for $600 !!!! Plus freight of $290-400...
Payment Options
Rotating Assembly or the Whole Package
Full Payment 100% Cash or Cashiers/Bank Check
Split Payment 50% Cash or Cashiers/Bankers check and 50% Paypal including Credit Cards!
For the Block and other Parts
Full Payment 100% of it as Cash, Cashier/Banker Check or Paypal!
Shipping Options
I am Located in the Northern Area of Orlando, Florida.
1 - Would prefer local Pick Up and if you do the local Pick up, I will throw in a brand new Motor stand and a 2-ton Motor Hoist for free if you can fit them in your truck!
2 - I will deliver with in 100 miles of Orlando Florida but, I don’t have room in my truck for the Hoist so you will only get the motor Stand for free. That means you will need a hoist (or a bunch of friends) at your location to unload the motor from my truck.
3 - If you want to have it shipped you will pay for those costs, I have a small skid to ship the Block on and can pack the other parts up to go with it.
Selling Reason
My reason for selling is simple, my truck runs great and I am not going to be pushing it any harder. That means that I have no need for these parts so, great deal for you!
Last edited by Lord Aries; Jan 19, 2007 at 09:11 AM.
Dave,
I figured I'd chime in, the parts in the rotating assembly consist of:
Custom Livernois Forged Steel 6-Bolt 4.000" Stroke Stroker Crankshaft
Manley 4340 Forged Steel H-Beam Rods
Mahle Forged 32cc Dish 4.030" Bore Pistons
Federal Mogul Tri Metal Copper-Lead Alloy Competition Rod & Main Bearings
We rate these kits for 1,000 HP
FYI: We retail these kits for $2,495.00 so Dave is selling at a great price!
Regards,
Rick LeBlanc
Livernois Motorsports
I figured I'd chime in, the parts in the rotating assembly consist of:
Custom Livernois Forged Steel 6-Bolt 4.000" Stroke Stroker Crankshaft
Manley 4340 Forged Steel H-Beam Rods
Mahle Forged 32cc Dish 4.030" Bore Pistons
Federal Mogul Tri Metal Copper-Lead Alloy Competition Rod & Main Bearings
We rate these kits for 1,000 HP
FYI: We retail these kits for $2,495.00 so Dave is selling at a great price!
Regards,
Rick LeBlanc
Livernois Motorsports
Last edited by LivernoisMotorsports; Jan 24, 2007 at 08:32 AM.
