Like new...Harlan Sharp 1.7 Rockers

Thread Tools

Search this Thread

Jan 22, 2007 | 08:27 PM

LETHL_SS

Thread Starter

TECH Enthusiast

iTrader: (21)

Joined: Oct 2005

Posts: 726

Likes: 0

From: New Bern, NC

Like new...Harlan Sharp 1.7 Rockers

These were used for one Dyno pull and wont work with my setup (my cam's ramp is too much) so they had to be taken off. They have been touched up and ready to install with no worries about hitting the heads.

$300 shipped

Last edited by LETHL_ZO6; Jan 23, 2007 at 05:32 PM.

Jan 23, 2007 | 04:31 AM

smok'nZ

MASS seller approved

iTrader: (160)

Joined: Apr 2006

Posts: 1,960

Likes: 3

From: OKLAHOMA

pics to spangler911@hotmail.com plz

Jan 23, 2007 | 05:32 PM

LETHL_SS

Thread Starter

TECH Enthusiast

iTrader: (21)

Joined: Oct 2005

Posts: 726

Likes: 0

From: New Bern, NC

Pics added

Jan 23, 2007 | 10:44 PM

Blow03SS

TECH Apprentice

iTrader: (2)

Joined: Dec 2005

Posts: 312

Likes: 8

From: Tucson, Az

what do I need to make these work with a set of Patriot LS6 stage 2 heads. I am currently using stock reockers.

Jan 24, 2007 | 03:46 AM

LETHL_SS

Thread Starter

TECH Enthusiast

iTrader: (21)

Joined: Oct 2005

Posts: 726

Likes: 0

From: New Bern, NC

Quote:

Originally Posted by Blow03SS

what do I need to make these work with a set of Patriot LS6 stage 2 heads. I am currently using stock reockers.

Not a whole lot... Basically just take out the thin baffle on the inside of the passenger valve cover and grind down one tab underneath the drivers side cover.

Jan 25, 2007 | 08:04 AM

LETHL_SS

Thread Starter

TECH Enthusiast

iTrader: (21)

Joined: Oct 2005

Posts: 726

Likes: 0

From: New Bern, NC

Ttt...........

Jan 26, 2007 | 08:40 AM

LETHL_SS

Thread Starter

TECH Enthusiast

iTrader: (21)

Joined: Oct 2005

Posts: 726

Likes: 0

From: New Bern, NC

Tttt....... these cost 389.99 plus shipping from TSP.

Trending Topics

Canted valve heads

72

10.4k
5.3 turbo low boost head gasket? Graphite?

10

195
Epic SRK B/S thread of 2019

12.7k

548.9k
1999 SS 1LE (aka. White Privilege)

23

679
88 Fiero Formula LS4/F40 6 speed swap

628

451.7k

Jan 28, 2007 | 08:46 AM

LETHL_SS

Thread Starter

TECH Enthusiast

iTrader: (21)

Joined: Oct 2005

Posts: 726

Likes: 0

From: New Bern, NC

tttttt

Jan 28, 2007 | 09:39 AM

SILVER SS 00

10 Second Club

iTrader: (44)

Joined: Nov 2005

Posts: 595

Likes: 0

From: deer park,tx

would they fit fine on a set of ls6 stage 3 heads from mti,would you go any lower.how much differance from the 1.8

Jan 28, 2007 | 11:01 AM

#10

LETHL_SS

Thread Starter

TECH Enthusiast

iTrader: (21)

Joined: Oct 2005

Posts: 726

Likes: 0

From: New Bern, NC

Quote:

Originally Posted by SILVER SS 00

would they fit fine on a set of ls6 stage 3 heads from mti,would you go any lower.how much differance from the 1.8

They would fit fine and there shouldnt be any fitment difference from the 1.8s. My price is firm since these have been used ~15mins and this price is ~$100 cheaper than you can get them shipped from a vendor.