Special offer from YANK for FEB.
01-25-2007, 09:33 AM
#1
Special offer from YANK for FEB. This is a special LS1 Tech offer only
for the month for FEBUARY
buy a PT 3800, 4000 or 4400 stall for a 4l60-e ,700r4, or 4l65-e and 4l70-e
from the website:
And pick your choice:
of a deep alum finned transmission oil pan
or a Yank transmission crossmember (any model)
FREE
that is up to a $150.00 dollar savings for you
Or
Buy any SS converter for the 4l60-e ,700r4, or 4l65-e and 4l70-e 3200,3400, 3600, 3800 or 4000 stall
from the website and recieve
a Transmission cooler for FREE
that is up to a $65.00 dollar savings for you
Call 775 826 9955 for more details
and have you LS1TECH member name on hand
www.converter.cc
for the month for FEBUARY
buy a PT 3800, 4000 or 4400 stall for a 4l60-e ,700r4, or 4l65-e and 4l70-e
from the website:
And pick your choice:
of a deep alum finned transmission oil pan
or a Yank transmission crossmember (any model)
FREE
that is up to a $150.00 dollar savings for you
Or
Buy any SS converter for the 4l60-e ,700r4, or 4l65-e and 4l70-e 3200,3400, 3600, 3800 or 4000 stall
from the website and recieve
a Transmission cooler for FREE
that is up to a $65.00 dollar savings for you
Call 775 826 9955 for more details
and have you LS1TECH member name on hand
www.converter.cc
Last edited by Yank; 01-25-2007 at 10:34 AM.
01-25-2007, 11:06 AM
#7
Originally Posted by DROPTOPLS1
Any specials for the 4l80E guys?
4l80-e converters are sold with a discount when ordered at the same time as transmission order is placed
We will have a new special each month so check back
Thanks
Yank
Trending Topics
01-26-2007, 04:54 AM
#11
TECH Enthusiast
Join Date: Sep 2004
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
Ok I have a 94z28 and the only mods I have done to it is
1) 150 shot of nitrous, which I havent sprayed in over a year.
2)17/11 nitto 555rs
3) Muffler was cut off when I bought it(sounds awesome)
4) and that is it.
My deal is Iam saving up to buy a house in the next month or two and I was going to go force induction but since I already have a dry nitrous kit I think it will be cheaper to go motor with spray? Not looking to dump alot of money at once into this car an overtime project. Because I still want to buy a house and cbr with in two months.
So should i buy some long tube pacesetter headers now and put 3'' pipe all the way to the back now?
Or buy a Cam first and if so what kind and what else will I need to buy to install it?
Or a convertor first? If so what kind?
and after this a set of HEADS
SO the final setup with end this year it will have a CAM, pacesetter longtube HEADERS, Full exhaust minus mufflers, Torque CONVERTOR, and the SPRAY and then HEADS as last.
But my dilema is what kind of cam, convertor and the order to purchase to put together to maximize horsepower and not have to purchase another product that I have already bought..
Basically want to do it right the first time as I go.
If you guy could PLEASE give me the specs on what CAM and convertor that will be friendly with occasional spray and my setup I have in mind. I would be so greatful!
Cause I need to know what Convertor to buy from you guys, what yields the most off of the 1/4 mile and will go with my setup!
1) 150 shot of nitrous, which I havent sprayed in over a year.
2)17/11 nitto 555rs
3) Muffler was cut off when I bought it(sounds awesome)
4) and that is it.
My deal is Iam saving up to buy a house in the next month or two and I was going to go force induction but since I already have a dry nitrous kit I think it will be cheaper to go motor with spray? Not looking to dump alot of money at once into this car an overtime project. Because I still want to buy a house and cbr with in two months.
So should i buy some long tube pacesetter headers now and put 3'' pipe all the way to the back now?
Or buy a Cam first and if so what kind and what else will I need to buy to install it?
Or a convertor first? If so what kind?
and after this a set of HEADS
SO the final setup with end this year it will have a CAM, pacesetter longtube HEADERS, Full exhaust minus mufflers, Torque CONVERTOR, and the SPRAY and then HEADS as last.
But my dilema is what kind of cam, convertor and the order to purchase to put together to maximize horsepower and not have to purchase another product that I have already bought..
Basically want to do it right the first time as I go.
If you guy could PLEASE give me the specs on what CAM and convertor that will be friendly with occasional spray and my setup I have in mind. I would be so greatful!
Cause I need to know what Convertor to buy from you guys, what yields the most off of the 1/4 mile and will go with my setup!
01-26-2007, 08:35 PM
#13
9 Second Club
iTrader: (17)
Join Date: Nov 2002
Location: New Braunfels ,Tx
Posts: 4,997
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys any way I can get a deal on a deep transmission pan from yall. Ive allready got yall's pro yank converter and crossmember for my 4l80.
Joe M
Shoot me a PM
Joe M
Shoot me a PM
01-29-2007, 06:22 PM
#20
Any deals on the PY3600 Extreme? I already have a fan-cooler and a B&M aluminum deep pan.
Will the transmission brace work with a Spohn frame mounted torque arm?
Am changing out my Vig 3200 for a Yank and will be ordering next week.
Will the transmission brace work with a Spohn frame mounted torque arm?
Am changing out my Vig 3200 for a Yank and will be ordering next week.