If anyone is interested I have a mild steel bolt in Autopower 4 point roll bar with removable cross bar for sale. Looking to get $150 for it. Pick up only, will not ship.

 

Can this be modified to make it NHRA legal? If so, I would be interedted.

 

Yeah it can have a door bar added. I think Those Guys Rods & Customs should be able to do it.

 

That depends on which bar it is. You would have to weld in the back brace and add the door bar. You can bolt it to the floor with 2 - 6" square plates top and bottom, but I doubt that you could remove it once it was welded together inside the car.

 

hmmm so what do i need in the car to run mid 10s at the track.

 

Thats the problem with most bars or cages. They need to be cut to remove them.

But on a side note, I would like to keep this thread on topic and limited to interested buyers.

 

picks ??

 

I was trying to provide 99LSS1 with the information he needed to make an informed decision not hyjack your thread.

 

The car is at Ellis's right now so it will be awhile before I get some pics posted.

NWDR, that was not directed towards you. I just want to make sure to keep it on topic.

 

so will i pass tech with this or do i need a 6-point

 

The cross bar needs to be welded and a door bar adder to pass tech for a 11.49 or faster.

 

Come on, is anyone interested?

 

I am going to run up tp Ellis's tomorrow and take a look. I will let you know.

 

I dont want to step on anyones toes but I will go check it out tomorrow as well as I am also interested.

 

if no one objects Id like to buy it. ~Guy