FS: 2 17x11 CHROME ZR1's
pics please to JesseClamp@comporium.net are they the 50 mm offset? any damage pitting, curb rash etc.???
Trending Topics
http://s78.photobucket.com/albums/j118/isercastiK/
there are a few pics in my photobucket right there. These wheels are as clean as you can get no junk, guarenteed.
there are a few pics in my photobucket right there. These wheels are as clean as you can get no junk, guarenteed.
Thread Starter
On The Tree
iTrader: (7)
Joined: Sep 2003
Posts: 127
Likes: 0
From: San Diego / Carmel CA
Offset is 36mm aka: ZR1 offset.
Wheels will sit 14mm (about 1/2 inch) farther away from the inside of the wheel well. I had no rubbing and did not need to 'massage' the inner wheel well with the BFH mod with these. It is suggested as with any 11" wheel back there to roll the fenders though.
(see pics of them mounted on my SS above).
These will stick out very slightly outside on the narrower Camaro fender by only about 1/4 inch.
On a Firebirds slightly wider wheel well they should sit flush wtih outside fender.
Wheels will sit 14mm (about 1/2 inch) farther away from the inside of the wheel well. I had no rubbing and did not need to 'massage' the inner wheel well with the BFH mod with these. It is suggested as with any 11" wheel back there to roll the fenders though.
(see pics of them mounted on my SS above).
These will stick out very slightly outside on the narrower Camaro fender by only about 1/4 inch.
On a Firebirds slightly wider wheel well they should sit flush wtih outside fender.
