Comes with cam, lifters, and custom length pushrods to convert your flat tappet setup to a roller setup. All ordered through jegs.

Cam specs:

Crane PowerMax Hydraulic Roller Tappet Retrofit Camshaft
Lift: .539''/.558''
Duration: 292°/300°
RPM Range: 3000-6500
p/n: 270-119661

Lifers:

Crane Hydraulic Roller Lifter
p/n: 270-11532-16

Pushrods:

Crane Chrome Moly
5/16'' -.719'' with Crane Hydraulic Roller Lifters, (Heat Treated)
p/n: 270-11628-16


All Parts have under 1500 miles on them, cam shows virtually no wear
Asking $450

 

bump for a good guy

 

thanks pat ^^ ... bump

 

Ttt. . . .

 

Still available?