obx headers?
02-24-2007, 09:07 AM
#4
TECH Resident
iTrader: (26)
Join Date: Apr 2006
Location: Ft Wayne, IN
Posts: 969
Likes: 0
Received 0 Likes
on
0 Posts
https://ls1tech.com/forums/generation-iii-external-engine/637662-all-xs-stainless-steel-headers-questions-here.html obx and xs are the same all ebay headers and i personally would have bought some over my pacesetter cause there stainless
02-24-2007, 11:08 AM
#6
TECH Resident
iTrader: (1)
Join Date: Oct 2005
Location: LaGrange, KY
Posts: 872
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by dpw41285
https://ls1tech.com/forums/showthread.php?t=637662 obx and xs are the same all ebay headers and i personally would have bought some over my pacesetter cause there stainless
OBX: https://ls1tech.com/forums/showthrea...ht=obx+headers
https://ls1tech.com/forums/showthrea...ht=obx+headers
POWERBOOST: https://ls1tech.com/forums/showthrea...t=ebay+headers
As you can see they aren't even close to being the same
Last edited by miamifan3413; 02-24-2007 at 11:13 AM.
02-24-2007, 11:10 AM
#7
TECH Resident
iTrader: (1)
Join Date: Oct 2005
Location: LaGrange, KY
Posts: 872
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 98MNBZ28
is anyone running these are heard things about these headers
Trending Topics
02-24-2007, 12:04 PM
#8
Someone got the OBX but several of us have the XS headers. I cant say much about them thanks to ls1tech's wonderful policy that I can't give out any info unless its from a sponsor. With that being said, my XS ehaders fit awesome, from what I have seen only 1 person is having a problem but hasnt cut off the tab on the block so that may have been it. they dont have a Y-pipe out yet but the Jet Hot one works and is the only noe that works and wsstore has it for 225 shipped. If you want more info on the XS headers i'll post a link to my thread with pics on them
02-24-2007, 12:08 PM
#9
Mmmmk, I got the thread for you, if you got any questions ask them in there that way people searching for it in the future will have them all in 1 big thread.
https://ls1tech.com/forums/showthrea...hlight=headers
https://ls1tech.com/forums/showthrea...hlight=headers
02-24-2007, 01:58 PM
#11
Teching In
Join Date: Feb 2007
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
obx header install. I am running those headers with their y pipe and hollowed out cats. I am also running the slp catback loudmouth 2. I just installed them and my car seems to be missing. It backfires sometimes to. I was wondering if anyone else has had this problem. No codes have came up on my car yet. all o2 sensors are hooked up as well as the egr valve. Headers look very nice and clearence is not a problem. just wish i could figure out why the car is running so hot. I heard that these cars take time to relearn after mods have been done. Maybe thats the problem. Any suggestions will help. thanks.
98 a4 camaro
slp catback ldmth 2
obx longtube headers
slp cold air intake
granitellie mass airflow
98 a4 camaro
slp catback ldmth 2
obx longtube headers
slp cold air intake
granitellie mass airflow
02-24-2007, 10:30 PM
#12
TECH Resident
iTrader: (26)
Join Date: Apr 2006
Location: Ft Wayne, IN
Posts: 969
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by miamifan3413
You are giving out some misinformation here.....
02-27-2007, 12:15 AM
#16
Teching In
Join Date: Feb 2007
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
found out the problem. I replaced the spark plugs with ngk TR55's and the car runs hard now. Set the gap right at 60. The weird thing was i checked all the stock plugs and none of them seemed to be cracked at all. The car has 42k on it. Car never threw any codes for the plugs though. as for the obx headers and kit, the install isn't to hard and the headers look darn good. I've put about 300 miles on the car including some racing and headers still look very nice. Hope this helps for anybody getting ready to do a header install.
ps- headers tuck up very well.
ps- headers tuck up very well.
02-27-2007, 07:54 AM
#20
TECH Enthusiast
Join Date: Feb 2005
Location: south jersey. again
Posts: 734
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by dpw41285
oops...normally i dont make a mistake. the sad thing is if he would have taken the time to do it himself. You and I both did it for him...oh well just the joy of being on the forums.