All Prices do not include shipping
Pictures are available, just ask
Im paypal verified and have many happy transactions
(Parted out a 2000 SS here a few years ago.

If you don’t see a price, make me an offer. More stuff to come, this is just the start. I'm traveling for the next few days but will be able to ship everything next week.

Motor-

MTI Stage IIE heads $1500 - SOLD

ARE Stage II heads $650
Used, had rocker to retainer contact, going to need new retainers

Comp Cams 224 cam $300 -SOLD
Custom Ground 228 cam $300 SOLD
Custom Ground Used cam $225 OBO
226/234-.555/.575-114
In good shape, LOVES nitrous.

7.4” hardened pushrods $90 -SOLD

Meziere Street Electric Water Pump $450
Black, less than 1k miles on it.

Katech Rod Bolts $120
Used in one motor for ~1500k miles
$160 new, stronger and better than ARPs

ARP Head Studs $160
With all washers/nuts in good shape

99 LS1 block
Good shape, still crosshatched, just spun rod bearing so the block is fine

LS1 rods and pistons

LS1 crank
Spun a rod bearing, big paperweight, make offer

I also have a ton of misc engine crap - oil pans, front and rear covers, alternators, power steering pumps, ac compressors, valve covers, ls1 intake, coil packs, etc etc... Make me an offer on any of that.

Drivetrain

Spec Flywheel $100
Needs to be turned, but should be fine

T56 – bad reverse synchro $850 pending
all forward gears are fine, reverse is finicky, works most of the time if you go 1-2-R to line up the gears, but the synchro for reverse is bad. Would be fine on a race car.

M12 Core -$700
Needs rebuilt from what I understand.

3.42 z06 rear end $1000
I think around 20k on it, no hard launches, no more than 450rwhp through it (came from a blinged out z06 on 19s or 20s in Miami)

Misc

Nitrous Kit

Racetronix 99-02 Fbody Fuel System $220
Best Fuel System you can buy, new harness to increase voltage, and a new fuel pump that doesn’t require drilling your fuel bucket. Bought from a guy that had a drag car, only a few passes on it $250 new
http://thunderracing.com/catalog/?ac...vid=3&pcid=166

Camaro Rear bumper $250
Red, in good shape

Interior

Corvette Driver Side Sport Seat $300
In pretty good shape, one small tear

Trans Am Seats $500
One seat is slightly bent from transportation but other than that they are in great shape

Raptor Shift Light $70
Awesome mod, lights up when you need to shift
RED

 

Are only selling the t56 tranny as a whole or serarate? I am looking for 1-2 & 3-4 synchronizer assemblies. thanks!

 

Complete. Its still drivable

 

Whats the power range of these cams?
Comp Cams 224 cam $300
224/224 .581/.581 112
Brand new in box with cam card

Custom Ground 228 cam $300
228/228 .595/.595 114
Brand new in box. Perfect for a stock motor

Are they rough idle, easy idle?

 

MTI Stage IIE heads, are they LS6 or LS1? Assembled? Why are you selling them?

 

Whats the cast number on the heads? Also PM me the a package price for the The MTI heads and EWP shipped to 61540. thankx

 

Sent PM on studs

 

Shoot me a pic of that Raptor light, could ya?

ruqwiker2@yahoo.com

 

I'm interested in the pistons and rods

 

Pics of the water pump to thephantompooper@hotmail.com?

 

PM me on the waterpump.

 

CLEAN OUT YOUR BOX. I am interested in the rod bolts.

 

I will give you $350shipped for the waterpump. They go for $432shipped new at Jegs.

 

Is the juice kit a basic kit? I am looking for a controller or a TPS switch.

 

Will you take $100 shipped for the rod bolts?

 

if u still have the 226/234 cam and pushrods i get those from u when my tax return comes in

 

Sorry, I just deleted 40 PMs so Im all clean...

 

NX kit...

10lb Bottle (completely full)
Bottle Mounting Brackets
Main nitrous line that runs from bottle to main nitrous solenoid
Both Solenoids w/ mounting hardware
WOT switch
Y nozzle and steel braided lines that run from solenoids to nozzle
Relay
One set of jets
Install instructions (fairly certain I have these, though they can be DL'd here: http://www.nitrousexpress.com/Instructions/main.htm)
Fuel pressure safety switch

The kit is in excellent condition and has only had ~6 bottles of nitrous go through it. I know they go for right around $600 new.
PRICE - $400

I think I have a window switch as well, Im gonna have to look.

 

Sounds good. Its a sweet cam Just PM me when you get that cash

 

How about $120 shipped? They are to a torque spec so they arent any different from new, and are $9 each new if memory serves me right...