SOLD

Complete set of Callies main caps for LS1 applications. Paid $531 plus shipping for them from Thunder Racing:

http://www.thunderracing.com/catalog...vid=3&pcid=117

Picture from website from when new:


I had these main caps installed on a 408" I had built. The motor was fired up and fully broken in with about 20-25 minutes of total run time. The customer decided he didnt want the extra 100 lbs so he swapped all the internals to a new LS2 block.

He didnt want to pay the additional machine shop costs to install the billet caps on the new shortblock so they are now for sale.

They have zero miles and 20-25 minutes of run time, no spun bearings etcetc. I only had the machine shop fit these to our block. Please check with your machine shop or builder etc about costs etc to fit them to your block (align hone like I had done for $150 I would assume).


I take paypal etc

 

tttttttt

 

Part number?? Any pictures?? Thanks!

 

ill post pictures when I get some...

I bought them from Thunder Racing for $531 plus shipping.

the specs are here:
http://www.thunderracing.com/catalog...vid=3&pcid=117

 

ttttttt

 

ttttttt

 

tttttt

 

Soldd