I brought a new pcm because i thought i needed one and i didnt. my engine coolant temp sensor was tripping and i wasnt a wire, the man who checked the wire said it was in the computer, so i brought one for 267.00 shipped. comes to find out it wasnt that, it was the pig tail that plugs up to the sensor and now im stuck with an extra 98 six speed pcm that is tuned allready.

willing to trade for:
pacesetter headers( good condition).
any suspension stuff
nitrous bottle plus cash
ported heads and i will give some extra cash
bottle warmer plus cash

or just sell right out for 200 plus shipping. they are rare to get ebay have only 2 and they are higher.

any one have anything to trade

 

any one

 

anyone

 

I have a wanted post for these things, https://ls1tech.com/forums/showthrea...light=1998+pcm

I don't need one but I always like to have one as an extra core or 2 laying around.

Ryan

 

i can vouch for this pcm i own the shop that removed it
diagnostic led us to the pcm being faulty because the engine temp was reading -38 degrees so after switching pcms it still read -38 degrees
come to find out it was the connector on the ect sensor not making contact that was bad causing the -38 degree reading
the pcm is dyno tuned for a 228 cam only car so it is ready to just plug in and play.