LS6 intake, Z06 wheels, corvette parts
Thread Starter
TECH Resident
iTrader: (94)
Joined: May 2003
Posts: 990
Likes: 0
From: port st lucie florida
LS6 intake that was modified years ago by wilson manifolds before they helped make the FAST intake. It has the floor cut out and was fully ported on the inside. It also has sheet metal in some parts to smooth trasitions. I got it from a local engine builder that had it sitting around for years after they did dyno testing and he said it made 7-10 horsepower over the stock LS6. I never dynoed it back to back.
SOLD





ZO6 wheels that came on my 2003 ZO6. All the wheels have slight curb rash but no major dings or dents. could easily be fixed. 17x9.5 fronts and 18x10.5 rears. They have new tires on them. I bought the car a week after the tires were put on and drove it home and changed them. Tires are Toyo Proxes T1R's 265-40-17 front, 295-35-18 rears.
SOLD thanks.








TSP long tube C-5 corvette headers. Ceramic coated. Scrached form installation but nothing more only have 1000 miles or less. Also have modded stock h-pipe to bolt right up.
SOLD


SOLD





ZO6 wheels that came on my 2003 ZO6. All the wheels have slight curb rash but no major dings or dents. could easily be fixed. 17x9.5 fronts and 18x10.5 rears. They have new tires on them. I bought the car a week after the tires were put on and drove it home and changed them. Tires are Toyo Proxes T1R's 265-40-17 front, 295-35-18 rears.
SOLD thanks.








TSP long tube C-5 corvette headers. Ceramic coated. Scrached form installation but nothing more only have 1000 miles or less. Also have modded stock h-pipe to bolt right up.
SOLD


Last edited by GTFORMULA; Apr 29, 2007 at 08:56 AM.
Thread Starter
TECH Resident
iTrader: (94)
Joined: May 2003
Posts: 990
Likes: 0
From: port st lucie florida
More stuff
Added
real carbon fiber air bridge for a C-5 corvette with silicon coupler. Almost like new some very small scraches .
SOLD thanks


DTE 6 speed diff strut brace has 100 miles and 1 track pass. like new.
SOLD thanks


99 FRC 3.42 differential with both side output shafts and side gear from Lingenfelter in good shape and didnt make any noise.
SOLD thanks



2003 ZO6 transmission. broken output shaft. has 76,000 miles . Trans works like new and shifts like new. perfect besides the output shaft.
SOLD thanks


Pm me so I know who is first in line .Paypal only all prices are firm. Thanks
Added
real carbon fiber air bridge for a C-5 corvette with silicon coupler. Almost like new some very small scraches .
SOLD thanks


DTE 6 speed diff strut brace has 100 miles and 1 track pass. like new.
SOLD thanks


99 FRC 3.42 differential with both side output shafts and side gear from Lingenfelter in good shape and didnt make any noise.
SOLD thanks



2003 ZO6 transmission. broken output shaft. has 76,000 miles . Trans works like new and shifts like new. perfect besides the output shaft.
SOLD thanks


Pm me so I know who is first in line .Paypal only all prices are firm. Thanks
Last edited by GTFORMULA; Apr 11, 2007 at 11:09 AM.
I'll go $350 shipped on the brace, paypal ready now!!
email me at ecurb3@comcast.net
AIM at FartpipeZ28
PM me here whichever
I'm not going to let this one go like the last one with you
email me at ecurb3@comcast.net
AIM at FartpipeZ28
PM me here whichever
I'm not going to let this one go like the last one with you
Trending Topics
Thread Starter
TECH Resident
iTrader: (94)
Joined: May 2003
Posts: 990
Likes: 0
From: port st lucie florida
Yes they are ceramic coated. They were on my 2003 Z06. They dont have any emissions fittings on them so you would have to have them welded on or take the emissions out of your car like I did.
to the top.
to the top.




