I also have a really nice cam for sale (dyno time only). By new I mean you cannot even see much evidence at all of the lifters having run on it. End of it says 228R/112. I just had it cam doctored. Here are the EXACT specs, 227.09/226.12, .579/.580 on 113. It would be an absolutely perfect street cam and with .40 milled heads it will make 11.4x SCR and ~8.8 DCR but will also be great with stock heads. Should make good power from 2500~6300 if installed straight up and max at 6000 if installed +4. I would like $250.00 shipped.

 

so its 228r?

 

No, that is what is engraved on the end of it. Specs are posted above and are not equivalent to the TSP 228R. Cam is custom and thats what was engraved for identification purposes. This cam is significantly different in the fact that with the correct milled head setup it should be making ~350 torque @ 2500rpm so it should be VERY peppy by the time a medium (3000-3600) stall is in its prime.

 

Bump. The fuzzy stuff on the cam is from it being stored in a cardboard box. This cam is in great shape.

 

bump. New day. Any offers? (reasonable)

 

Great seller guys! Wouldnt hesitate to buy from him again.