Selling my Blower setup, LT4 stuff, and lots of other LT1 parts as I'm making way for a new setup, an all nitrous solid roller setup.

Vortech A-Trim setup with 6-7lb pulley, all gaskets, plumbing included, 4an braided line, new fittings for oil feed, all crank pulleys, damper, belt, and mounting brackets included. Will even include an LT1 oil pan so you can tap into it for your oil return. FMU and oil cooler for early model LT1's included as well. -$1800 shipped without ignition or cam, or $1950 shipped with cam! That's a steal people!





Used set of stock LT1 valve covers -$30

 

LT4 intake, unported, some misc. AN fittings are on it, they can be included or removed, also has the EGR delete aluminum covers bolted to the rear of it, which will be included. -$470

 

Custom grind LT1/LT4 Bullet Racing Cams Blower Cam. Brand new still in packaging with grind sheet! Nasty cam! $300, or $200 when bought with blower




Specs on that sheet are with 1.5RR's, lift with 1.6RR's is .567/.605!


GM performance parts 1.6RR's, these came with my assembled LT4 heads in the LT4 kit from GM. I believe my heads have 7/16 studs on them. These look and perform like brand new! -$190.

 

Also have a boost gauge Ultra Lite and vortech bypass valve!

 

TTT! willing to negotiate

 

upppp

 

I have a MSD 6BM blower ignition to throw in to sweeten the deal!

 

I'm interested in your supercharger. Where in NJ do you live?
thanks,
Drew

 

PM'd you!

 

How much for the rockers a msd???

 

I was wondering if the LT4 intake is stock? The New edelbrock LT4 intake is $464.95 new. Thanks Terry,

 

But it's edelbrock.. the Lt4 is proven.. haven't seen anything about the edelbrock yet...

 

hey i'm intersted in the LT4 intake and possibly the cam. Where in NY do you live? Thanks

 

LT4 is still available, how about $475 shipped with some arp intake manifold bolts. I'm in Trenton, not NJ.

 

would you consider a pickup? What exactly do you have done to the manifold? What are the AN fittings?

Thanks

 

Sure, I'd consider a pickup, easier on shipping too. The fittings are just misc ones I used for vacuum lines. You can just remove them and put back on the 1/4" nipple fit fittings for all the accessories.

 

MSD Ignition Sold!
LT4 intake Sold!


** Update, the blower is actually the LT1 A Trim Kit, This headunit maxes out around 10psi, however, I dynoed 500rwhp with it still. Because of this, I'm asking $1800 shipped, without cam or ignition. That's a steal. $1800 for an LT1 supercharger kit, complete down to the pan. $1950 shipped with the cam!

 

Bump!!

 

$1750 for a blower package people!!