LS2 shortblock, UMI LT1 tubular k-member NIB
I have a near complete LS2 short block with less than 5,000 miles. I need this stuff GONE. it includes the following:
LS2 block sold
LS2 crank, 24x reluctor, needs to be turned down. #6 rod journal slightly damaged. See THIS PICTURE. $90
LS2 cam $100
LS2 timing set sold
LS2 front cover sold
LS2 valley cover sold
LS2 oil pump sold
cam position sensor sold
crank position sensor sold
coolant temperature sensor sold
knock sensors sold
crank pulley sold
stock rockers sold
F-body oil pan sold
prices do not include shipping.
LS2 pictures
click "full size" for even larger pictures.
*LS2 and L92 heads are NOT included.
edit: updated list
LS2 block sold
LS2 crank, 24x reluctor, needs to be turned down. #6 rod journal slightly damaged. See THIS PICTURE. $90
LS2 cam $100
LS2 timing set sold
LS2 front cover sold
LS2 valley cover sold
LS2 oil pump sold
cam position sensor sold
crank position sensor sold
coolant temperature sensor sold
knock sensors sold
crank pulley sold
stock rockers sold
F-body oil pan sold
prices do not include shipping.
LS2 pictures
click "full size" for even larger pictures.
*LS2 and L92 heads are NOT included.
edit: updated list
Last edited by zigroid; Sep 11, 2007 at 08:52 AM.
Trending Topics
the engine spun the #6 rod bearing. all mains are fine. the crank needs to be fixed. I have never had a machine work quote for it. dunno if you saw the picture or not but the damage is definitely repairable. needs to be ground down a hair and have the appropriate rod bearings used. It'll then need pistons/rings/rods/rod bolts. a set of nice forged rods and pistons would make this a stout engine.






