i have a set of Ross pistons on eagle rods for sale, i bought them from another member but i decided to go a different route and do not need them. one piston has a few nics in the top of it but the person i bougth it from had them checked out by a machine shop, and they said they are ok, i also got a second opinion from a few people and they said they are fine.

here is some info on the parts

Ross pistons part number 99838, 3.905 bore, 2618 T-61 aluminum, -4cc valve reliefs, 1.326 compression height, made for stock lenght rods opn stock stroke crank.

price new is $864

rods are Eagle h beams part number CRS6100L3D with ARP8740 rod bolts, they are stock lenght and are already on the pistons.

Price new listed on Eagle's website is $625 but im sure they are cheaper everywhere else.

here are some pics








price new is $1489
im asking $790 plus shipping

 

bump to the top, and ive gotted about 3 offers of 700 and lower, dont bother making an offer that low, im not going to take it

 

bump for the night

 

price lowered

 

comon peeps, i need to sell these asap

 

You can get the eagle rods for $385 on ebay, pistons are 750 from summit. I'll buy the set for $425 shipped.

From the pics it looks like 2 of the pistons have some nicks on them.

 

If you would read the post he said that they had nicks!! It is because of pepole like you that people don't like to sell things. If you can buy them on ebay for that cheap, then don't bother wasting this guys time! Don't waist peoples time giving them stupid offers!!!!!!!!!!!!!!!!!!!!!!!!!!

 

He said one piston had nicks, why don't you learn to read **********. It's a very fair offer considering the damage to 2 of the pistons, go get some ***** bitch.

 

if you read all my posts, you would have noticed i said dont bother with the low offers, ive already denied three offers under 700

these are also assembled, so you dont have to spend an extra 100 bucks at at machine shop to put the rods on the pistons.


and your looking at the wrong rod too, look at the part numbers, if you match my part number to the correct rods on ebay they are about 450 bucks, your looking at a different rod buddy

so even with buying rods off of ebay, pistons from summit, and assembly of them, the price is still 1300 bucks

pistons have been checked out and are all good, there is not a thing wrong with them, 790 is bassically the price of the pistons alone.

 

Too bad these arent 6.125 rods or else I would be all over them... Good price!!!

 

thanks man

 

to the top

 

could send me pics of the nicks to zaragoza_joe@yahoo.com

 

ya, ill take some pics in a few

 

couple people interested but still havnt seen any money

 

ttt again

 

more people say they want, but still no money

 

Money sent. Thanks, Tim