FS: TH350 brace, control arms, B&M pro ratchet shifter, driveshaft, torque arm, ect..
Thread Starter
TECH Enthusiast
iTrader: (21)
Joined: Oct 2005
Posts: 726
Likes: 0
From: New Bern, NC
FS: TH350 brace, control arms, B&M pro ratchet shifter, driveshaft, torque arm, ect.. ALL Parts are for a LS1 Fbody
I have a used but excellent condition BMR TH350 cross brace powdercoated black w/ torque arm relocation, red BMR tubular contol arms(non adj), B&M pro ratchet shifter, LS6 85mm Maf with adapt harness (like new), Raptor shift light, and SLP 90mm lid (like new).
SOLD the crossbrace
SOLD the control arms
Shifter is SOLD
$130 shipped for the Maf and harness
SOLD the Raptor Shiftlight (red LED)
LID is sold
For anyone relatively local (wont ship these due to the size but can possibly meet somewhere):
SOLD
Black Edelbrock adj panhard rod
SOLD
Black full length adj. BMR torque arm (rear mount trimed to fit a 12 bolt)
SOLD
Custom 3" mandrel bent true dual setup that crosses under the rear axle and dumps just before the rear facia... dual flowmaster 50 series mufflers (setup to be a perfect fit to Kooks LT's but can be made to work with other headers).... setup looks like new!
$300
I have a used but excellent condition BMR TH350 cross brace powdercoated black w/ torque arm relocation, red BMR tubular contol arms(non adj), B&M pro ratchet shifter, LS6 85mm Maf with adapt harness (like new), Raptor shift light, and SLP 90mm lid (like new).
SOLD the crossbrace
SOLD the control arms
Shifter is SOLD
$130 shipped for the Maf and harness
SOLD the Raptor Shiftlight (red LED)
LID is sold
For anyone relatively local (wont ship these due to the size but can possibly meet somewhere):
SOLD
Black Edelbrock adj panhard rod
SOLD
Black full length adj. BMR torque arm (rear mount trimed to fit a 12 bolt)
SOLD
Custom 3" mandrel bent true dual setup that crosses under the rear axle and dumps just before the rear facia... dual flowmaster 50 series mufflers (setup to be a perfect fit to Kooks LT's but can be made to work with other headers).... setup looks like new!
$300
Last edited by Humm_MeSUT; May 13, 2007 at 04:26 PM.
Trending Topics
Thread Starter
TECH Enthusiast
iTrader: (21)
Joined: Oct 2005
Posts: 726
Likes: 0
From: New Bern, NC
Originally Posted by slimcracka
wow dude... didnt even last a week...and a lil fyi your asking price is about as much as they are new..
TCC009 98-02 F-Body with Powerglide/TH350 $254.95
TCC009 98-02 F-Body with Powerglide/TH350 $254.95
TJ, PM sent.
then why spend so much money on a setup you have to change when theres alot of cars out there with different setups ??
car seemed to sound good and run great with the th350 and TDs..
but its your car and i hope you have fun with it..
ttt
car seemed to sound good and run great with the th350 and TDs..
but its your car and i hope you have fun with it..
ttt
Thread Starter
TECH Enthusiast
iTrader: (21)
Joined: Oct 2005
Posts: 726
Likes: 0
From: New Bern, NC
Originally Posted by 01 BERGER CAMARO SS
Will the 350 brace fit a lt1 body style with a powerglide?
