Well I have a set of used Patriot stage 3 ls6 style heads part #2015. I just bought these from another member not to long ago. One of them is still wrapped up. But decided that I'm going a different route. SOLD

http://i73.photobucket.com/albums/i2...essi/pats1.jpg
http://i73.photobucket.com/albums/i2...essi/pats4.jpg
http://i73.photobucket.com/albums/i2...essi/pats3.jpg
http://i73.photobucket.com/albums/i2...essi/pats2.jpg

Also have set of Stage II Jantzer ported heads.
The heads have stock LS6, with hollow stem valves and sodium filled on the exaust side.
The heads flow 296@.570 according to Jantzer. They have Comp cam 918 springs/titanium retainers, with stock gm seals & locks. They are GM 241 casting centerbolt heads (the best ones). They were milled .035". I had this with a TR224 and performed real well with this setup. Look at my best time in the sig. SOLD. It will include the pushrods, NGK TR55 plugs. Works awesome with a mild cam.
http://i73.photobucket.com/albums/i2...ssi/heads1.jpg
http://i73.photobucket.com/albums/i2.../pushrods1.jpg
Valvetrain pics-
http://i73.photobucket.com/albums/i2...valvetrain.jpg

Tomorrow I'm going to drain the fluid out of my rear and take off the T/A cover. The rear end has a broken Diff and don't know if the 3.7 3gears are good but post up if they are. I'm asking $100+shipping OBO for the cover. It will include the bolts also. SOLD

used Hooker ORY-$150+shipping OBO
SLP air lid $75+shipping
stock lifters w/ 42Kmi. SOLD
stock rockers- $50+shipping OBO
stock '01 camaro SS front and rear shock springs- $50+shipping OBO
stock SS grille-$10+shipping
lower air intake w/ free air mode and w/ clips-$10+shipping

Any questions please PM me. Thanks

 

Bump for the day. First person with the $$ takes the prize.

 

pm sent

 

willing to sell push rods. are they 7.4???

 

They're not the stock length. They're 7.350.

 

PM sent.

 

Bump TTT

 

PM Sent!!!!

 

Both sets of heads all sold last night. Everything else is still up for sale. All them are a OBO.

 

Do the rocker arms have the same 42k as the lifters? And are they from the 01 SS you list other parts for?

 

They're from the formula. My formula has fewer miles then the 01 SS. They have 42K mi. on them. Thanks, Joe

 

I also have a set of 16" salad shooter w/ MT ET streets on. They have about 7 passes on them. STill have a lot of meat left. Asking $300+shipping obo. Thanks