Located in Long Island NY.


Heres a link to a local board.

http://www.fastlsx.com/forums/showthread.php?t=14679
for those that moan about signing up to board to see pics i just added the same two.

thanks for looking

 

links the pics here....

 

I wish I could use them everyday i would buy em

 

if you are willing to sell the fronts let me know

 

 

cant see the pics unless you sign up

 

I drive the **** out of mine, I just slow down on rough roads and keep my eyes open for pot holes. You can use them on the streets, it just voids the warranty. They're tougher than people seem to think. Also, the skinny radials that most people use are really rough on the skinnies as well. I run sportsmans (bias ply) on the front of my car, no ill effects yet. Keep this in mind, if you break a pro star or drag lite or whatever, they won't give you a new one either.

 

Fronts only?

 

Oh man, I would be all over these if I had a month to get a check...

 

I want a set of those for the fronts.

 

sorry will not part the set.
updated the link with pics,

 

Are these good for a 12 bolt?

 

same wheels I have, good deal too. They will work on a 12 bolt etc.etc btu to be legal you will need to put longer wheel studs on, but that's not a big deal.

 

Yeah, they work fine on the stock studs too, bu they're not legal. I usually go through tech with the drag radials on first, and then swap on the slicks. Ironically last time Island gave me flack about the DR's not having a metal valvestem. Go figure.

 

If these are still around after I get my first check from my internship (first week of june), I might just have to snag these. unless he was willing to hold them?

 

Get someone to float you a 2 week loan..they'd sure come in handy for the rental!

 

ttt.

pms responded

 

How much are they?

What sizes are they?

Do they come with the tires?

Update: Nevermind, I clicked on the link and got the info.
I didn't at first, because I thought I had to sign up as stated above.

I already have these wheels, I was thinking of picking these up as a spare?

 

The fronts are the ones set up to clear the stock brakes, correct??? Thanks.

 

fronts and rears both clear stock brakes, the spacers are welded to the inner part of the wheel so there's nothing added to do.