LS6 Intake off a 00' corvette. 30K miles on these parts, Intake is in great shape, no cracks scratches or any damage to it. Comes with intake runner seals and throttle body gasket - SOLD







Shaner S2 P/P Corvette throttle body. This is off the same vette is has been ported, polished, epoxied, and had the screws back-cut. Also in great shape with no cracks etc. it comes with everything in the picture including the TPS sensor - SOLD







Bare unasembled set of 806 casting heads with 48K miles on them, they do come with the valves but are unasembled - number 8 cylinder has 1 one rocker stud that is heli-coiled but works perfectly. Only selling because I put on a set of 243's. - asking $95.00





98 Perimeter bolt valve covers, No cracks or anything and will come with the valve cover seals that are less than 2 months old. - asking $45





Fuel Rail, works perfect. - SOLD


All prices are + actual shipping and OBO - I will accept money order or Paypal (add 3%)

 

Not to rain on your theat, but the LS6 intake did not come out till 01, and that was on the C5 ZO6.

 

Not to rain on your post but some of the later '00 vettes and fbodys got the ls6 intake.

The one in the picture is a ls6 intake.

 

Thank you sir, its pretty easy too tell by the floor of the intake it is infact an LS6.

 

Can I get the Part # off the intake? Are the mounting holes for the throttle cable bracket threaded or no? I have $325 shipped for it...

 

I'm next in line on the intake. Let me know if the sell don't go through

 

guys Im goin to hold out for full price, I have had alot of interest in these parts on both here and corvetteforum - I will let you know if anything changes.

Part# is 12573572 - brackets holes are threaded

 

stuffs gotta go guys.

 

What kind of heads are 806 castings?

 

806's 98' heads

 

Pm sent about intake.

 

VERY interested in Intake. You've got another PM

 

Ls6 is SOLD