6.0 Heads Cam Crank Pistons!!

 
Thread Tools
 
Search this Thread
 
Old Jun 11, 2007 | 02:44 PM
  #1  
Stang Killer's Avatar
Thread Starter
TECH Apprentice
15 Year Member
iTrader: (27)
 
Joined: Sep 2006
Posts: 307
Likes: 1
From: Poteau Oklahoma
Arrow 6.0 Heads Cam Crank Pistons!!

OPEN TO TRADES ALSO

Bought a 6.0 from a dealership as a core to start on my 408 build, and i dont need the internals, or the heads. Dont have any pics yet, but post with your email address and ill try to send you some later this week. The motor had 32,000 on it. I know that for a fact becasue i was working there when i got the motor.

Stock 6.0 heads complete $250 plus shipping SOLD!!
Stock 6.0 Crank (looks great) $250 plus shipping SOLD!!
Stock 6.0 cam $100 shipped BRAND NEW $390
Stock 6.0 Rods and Pistons $200 SHIPPED BRAND NEW $86 A PIECE FOR PISTONS
$54 A PIECE FOR RODS THAT EQUALS $1120.00 NEW
7 of them are great, 1 piston came out the bottom of the motor when we pulled the rotating assembly, and has a chip in the bottom of the piston and snapped, i believe, 2 rings. You can see the chip in the pic, the last piston on the right, on the bottom right side. The rod on the messed up piston is fine tho since 1 is messed up, i think $280 shipped is fair my number is 1-918-658-8825

all this stuff is obo so shoot me a pm








Last edited by Stang Killer; Jun 23, 2007 at 02:41 PM.
Old Jun 11, 2007 | 02:48 PM
  #2  
zmonsterjb's Avatar
TECH Apprentice
iTrader: (16)
 
Joined: Apr 2007
Posts: 325
Likes: 0
From: Marianna
Default

is this lq9 or 4 stuff!
Old Jun 11, 2007 | 03:19 PM
  #3  
L"SS"1's Avatar
Staging Lane
iTrader: (14)
 
Joined: Dec 2006
Posts: 52
Likes: 0
Default

whats the casing number on the heads? If there 314's I will take them. How far is Poteau, Oklahoma from Oklahoma city. Would you mind if I came and picked them up?
Old Jun 11, 2007 | 03:25 PM
  #4  
Stang Killer's Avatar
Thread Starter
TECH Apprentice
15 Year Member
iTrader: (27)
 
Joined: Sep 2006
Posts: 307
Likes: 1
From: Poteau Oklahoma
Default

pretty sure they are lq9's
Old Jun 11, 2007 | 03:40 PM
  #5  
Stang Killer's Avatar
Thread Starter
TECH Apprentice
15 Year Member
iTrader: (27)
 
Joined: Sep 2006
Posts: 307
Likes: 1
From: Poteau Oklahoma
Default

heads sold to L"SS"1
Old Jun 11, 2007 | 03:57 PM
  #6  
zmonsterjb's Avatar
TECH Apprentice
iTrader: (16)
 
Joined: Apr 2007
Posts: 325
Likes: 0
From: Marianna
Default

pm you if so I may take them.
Old Jun 11, 2007 | 06:40 PM
  #7  
Stang Killer's Avatar
Thread Starter
TECH Apprentice
15 Year Member
iTrader: (27)
 
Joined: Sep 2006
Posts: 307
Likes: 1
From: Poteau Oklahoma
Default

got the pics working! for all who asked for them
Old Jun 11, 2007 | 06:43 PM
  #8  
yobabiesdaddy2001's Avatar
Banned
iTrader: (20)
 
Joined: Feb 2003
Posts: 607
Likes: 0
From: Fort Rucker
Default

put me next in line for the lq9 pistons
Old Jun 11, 2007 | 06:51 PM
  #9  
WS6FAST's Avatar
Teching In
iTrader: (9)
 
Joined: Apr 2006
Posts: 29
Likes: 0
From: Apple Valley, Ca.
Default

by the look of the 3rd pic the heads are 317 castings....
Old Jun 11, 2007 | 06:52 PM
  #10  
Stang Killer's Avatar
Thread Starter
TECH Apprentice
15 Year Member
iTrader: (27)
 
Joined: Sep 2006
Posts: 307
Likes: 1
From: Poteau Oklahoma
Default

they are 317 castings, you are correct haha but they did come factory off of my iron 6.0 and yobabiesdaddy2001, the pistons are yours if you want them. pm me
Old Jun 11, 2007 | 07:03 PM
  #11  
yobabiesdaddy2001's Avatar
Banned
iTrader: (20)
 
Joined: Feb 2003
Posts: 607
Likes: 0
From: Fort Rucker
Default

that kind of looks like a lq4 piston
Old Jun 11, 2007 | 07:09 PM
  #12  
Stang Killer's Avatar
Thread Starter
TECH Apprentice
15 Year Member
iTrader: (27)
 
Joined: Sep 2006
Posts: 307
Likes: 1
From: Poteau Oklahoma
Default

well id go look at the block, but its in chicota getting bored..so...haha im not exactly sure what it is
Old Jun 11, 2007 | 07:13 PM
  #13  
yobabiesdaddy2001's Avatar
Banned
iTrader: (20)
 
Joined: Feb 2003
Posts: 607
Likes: 0
From: Fort Rucker
Default

if you had a pic of the top portion I could tell.
Old Jun 11, 2007 | 07:21 PM
  #14  
Stang Killer's Avatar
Thread Starter
TECH Apprentice
15 Year Member
iTrader: (27)
 
Joined: Sep 2006
Posts: 307
Likes: 1
From: Poteau Oklahoma
Default

well i just took pics of the pistons, gimme a few min and ill have em uploaded
Old Jun 11, 2007 | 07:28 PM
  #15  
Stang Killer's Avatar
Thread Starter
TECH Apprentice
15 Year Member
iTrader: (27)
 
Joined: Sep 2006
Posts: 307
Likes: 1
From: Poteau Oklahoma
Default

cleaned up the one piston so you could see the top, and took a side pic of the other one...hope that helps
Old Jun 11, 2007 | 07:32 PM
  #16  
yobabiesdaddy2001's Avatar
Banned
iTrader: (20)
 
Joined: Feb 2003
Posts: 607
Likes: 0
From: Fort Rucker
Default

yeap lq4, see the bowl or dish, a normal lq9 is flat.
Old Jun 11, 2007 | 07:33 PM
  #17  
yobabiesdaddy2001's Avatar
Banned
iTrader: (20)
 
Joined: Feb 2003
Posts: 607
Likes: 0
From: Fort Rucker
Default

thanks though!
Old Jun 11, 2007 | 07:43 PM
  #18  
Stang Killer's Avatar
Thread Starter
TECH Apprentice
15 Year Member
iTrader: (27)
 
Joined: Sep 2006
Posts: 307
Likes: 1
From: Poteau Oklahoma
Default

yep!!
Old Jun 12, 2007 | 02:42 PM
  #19  
Stang Killer's Avatar
Thread Starter
TECH Apprentice
15 Year Member
iTrader: (27)
 
Joined: Sep 2006
Posts: 307
Likes: 1
From: Poteau Oklahoma
Default

up ttt!
Old Jun 13, 2007 | 06:41 PM
  #20  
Stang Killer's Avatar
Thread Starter
TECH Apprentice
15 Year Member
iTrader: (27)
 
Joined: Sep 2006
Posts: 307
Likes: 1
From: Poteau Oklahoma
Default

up ttt



All times are GMT -5. The time now is 11:49 AM.