SOLD! - low mileage LS1 longblock FS: Central, IL.
Thread Starter
11 Second Club
iTrader: (3)
Joined: Apr 2007
Posts: 150
Likes: 0
From: Bloomington, IL.
SOLD!!! I am selling a LS1 longblock - WILL NOT SEPERATE!!!
The shortblock itself is a LS6 shortblock(casting # 12561168) and heads are LS1(casting # 241). It is assembled and "ONLY" comes with/includes all covers, crank pulley, custom cam, moly pushrods, and Comp Cam springs. I'm also throwing in the stock injectors. Nothing else comes with the motor.
The motor is out of my 2002 WS6 that I purchased two years ago this coming July. The car had 9,083 miles at my time of purchase and currently has 20,131 miles. Can show my sales sheet from the dealership with that mileage if needed. The motor is out as I am replacing with a bigger cube motor and no longer have a use. This is not my DD and have ran Mobil 1 since I have owned. The cam was installed sometime last spring. It was tuned at Speed,Inc. and put down 390rwhp through a T-56 with all accessories hooked up.
Cam Specs:
- Thunder Racing cam set
- 566 lift/224 dur on int/exh
- 112 LSA
Asking 2000 ----- the Cam set alone was 600 bucks!.
IM me your email and I will send you pics.
The shortblock itself is a LS6 shortblock(casting # 12561168) and heads are LS1(casting # 241). It is assembled and "ONLY" comes with/includes all covers, crank pulley, custom cam, moly pushrods, and Comp Cam springs. I'm also throwing in the stock injectors. Nothing else comes with the motor.
The motor is out of my 2002 WS6 that I purchased two years ago this coming July. The car had 9,083 miles at my time of purchase and currently has 20,131 miles. Can show my sales sheet from the dealership with that mileage if needed. The motor is out as I am replacing with a bigger cube motor and no longer have a use. This is not my DD and have ran Mobil 1 since I have owned. The cam was installed sometime last spring. It was tuned at Speed,Inc. and put down 390rwhp through a T-56 with all accessories hooked up.
Cam Specs:
- Thunder Racing cam set
- 566 lift/224 dur on int/exh
- 112 LSA
Asking 2000 ----- the Cam set alone was 600 bucks!.
IM me your email and I will send you pics.
Last edited by WFOWS6_IL; Jun 19, 2007 at 07:52 AM. Reason: motor is sold!
Thread Starter
11 Second Club
iTrader: (3)
Joined: Apr 2007
Posts: 150
Likes: 0
From: Bloomington, IL.
Originally Posted by turbowhistle86
dude, throw that thing in the pickup, then you'd have 2 hotrods! 



