I have the PHB and LCA's we build in house in the for sale section, but we will keep the same low prices PLUS install them for free if you are in the area as a thank you!

If you have a custom app. that you need built, let us know and we can custom tailor to your needs! Here are the specs:











Our PHB's and LCA's are made from the highest quality Billit Aluminum for strength and longivity. They will handle the roughest road courses and dragstrips to daily driven abuse! They come ready to install with machined flats to easily adjust by wrench and they are fully "on the car" adjustable for quick adjustments on the road or in between rounds! It weighs in at only 3.75 LBS a side for the LCA and 3.75 LBS for the PHB with a great polished finish!!

They will come "pre-set" to OEM locations to position you back to stock locations, and than can be on-car adjusted for fine tuning.

The LCA rodends are chrome-moly with teflon inserts! This will help cut down on road noise and keep the rod end lubricated! I upgraded the rodends and kept the same price so you are getting a much better deal!


89.00 for the PHB
159.00 for the LCA

If you need further help please do not hesitate to ask.

Thank!

Bryan

 

Wow that didnt take long! 3 complete sets sold and pair of LCA's!

 

are those stout enough to take really hard launches (5k dump) and going 10's 1/4mile? and how much weight savings are these vs. stock components?

 

The fastest car to date that they are on runs high 9's on a trans break car and on my car i launch around 6200 on my m6 car! You know on the weight savings ill go and weigh the stock parts and compare the two!

They are not gonna break! They are allot more stout than any other billet component ive seen because they buy pre drilled material totally hollow inners and mine are solid through out the entire center besides where the rod ends screw in.

 

how would these compare to hotchkis? had a set on the last car. these look nice enough. shoot me some details ill come buy a set for my car!!

 

ill take a set. give you guys a call.

 

Okay I have them on the scale right now.. The stock LCA is weighing in at 5.5 LBS and my LCA with rod ends and jamnuts are weighing in at 3.35 LBS.

 

Not too sure.. I know mine work really well but ive never done a side by side comparison. Let me know!
Bryan

 

Sounds good!

 

For the guys and girls wanting powder coating, they will be done first thing monday morning.. fully assembled and adjusted, and shipped out that afternoon!
Others will be out the door tomorrow!

 

maybe i missed it. but im guessing you have PC red and black? How much to ship to 78666 for the PHB?

 

I can powder coat whatever you want. They are $10 for the LCA's to get coated and $10 for the phb! It is 9.95 shipped

 

Pretty sweet deal.

 

Thanks man! If you didnt have a vette you could get a set!

 

Ill let ya know man, I already ordered the PHB from Bryan.

 

Yours is shipping out on monday!!

 

will the phb and lca's work in a 3rd gen fbody with a ls1 rear end swap?
do u make tq arms also?

 

Yes they will and not yet on the torque arms. those and sub frames are in the works right now actually as well as 05-07 mustang suspension.

 

 

Looks good Bryan, cant wait to add it to the pile in my room already.