4.03" Custom Pistons, Meziere Race Pump, Sheetmetal Valve Covers, & More

 
Thread Tools
 
Search this Thread
 
Old Jun 27, 2007 | 07:40 AM
  #1  
98 Silver Bullet's Avatar
Thread Starter
TECH Apprentice
iTrader: (28)
 
Joined: Apr 2003
Posts: 381
Likes: 1
From: SE Oklahoma
Default 4.03" Custom Pistons, Meziere Race Pump, Sheetmetal Valve Covers, & More

NEW 4.03” bore Diamond high compression pistons with lateral gas ports. Designed to use with LS6 heads. Will yield a compression ratio of 14:1 with 62 cc chambers. With Total Seal rings. $600.00 shipped

NEW Meziere polished race electric water pump. SOLD

APS Powder coated sheetmetal valve covers. Includes dual breathers & hardware. Uses factory gasket. $220.00 shipped

NEW Madman LS motor plates. $100.00 shipped

ASP underdrive pulley with 1500 miles. Does not include bolt. $100.00 shipped

Jet Hot headers with 3 bolt flanges welded on. 1500 miles. Sale Pending
Money order, cashiers check, or Paypal (add 3% fee)
Attached Thumbnails 4.03" Custom Pistons, Meziere Race Pump, Sheetmetal Valve Covers, & More-p6180006.jpg   4.03" Custom Pistons, Meziere Race Pump, Sheetmetal Valve Covers, & More-p6180007.jpg   4.03" Custom Pistons, Meziere Race Pump, Sheetmetal Valve Covers, & More-p6180009.jpg   4.03" Custom Pistons, Meziere Race Pump, Sheetmetal Valve Covers, & More-p6180004.jpg   4.03" Custom Pistons, Meziere Race Pump, Sheetmetal Valve Covers, & More-p6180003.jpg  

4.03" Custom Pistons, Meziere Race Pump, Sheetmetal Valve Covers, & More-p6180012.jpg   4.03" Custom Pistons, Meziere Race Pump, Sheetmetal Valve Covers, & More-p6180011.jpg  

Last edited by 98 Silver Bullet; Jun 27, 2007 at 03:26 PM.
Old Jun 27, 2007 | 08:00 AM
  #2  
DZ-TA's Avatar
Teching In
 
Joined: Aug 2003
Posts: 6
Likes: 0
Default

are the valve covers centerbolt style?
Old Jun 27, 2007 | 08:22 AM
  #3  
383astro's Avatar
On The Tree
 
Joined: Apr 2007
Posts: 123
Likes: 0
From: Seminole, OK
Default

Ill take the headers if they are LTs.
Old Jun 27, 2007 | 09:41 AM
  #4  
98 Silver Bullet's Avatar
Thread Starter
TECH Apprentice
iTrader: (28)
 
Joined: Apr 2003
Posts: 381
Likes: 1
From: SE Oklahoma
Default

are the valve covers centerbolt style
Yes, there is an attached picture if want to see them.
Old Jun 27, 2007 | 09:51 AM
  #5  
CanuckSS's Avatar
TECH Regular
iTrader: (13)
 
Joined: Aug 2002
Posts: 472
Likes: 0
From: Ancaster, ON - Where F-bodies are rare!
Default

I will take the water pump.
I will PM you.
Thanks
 




All times are GMT -5. The time now is 02:34 AM.