Heads/Cam for a Nitrous 408
Heads/Cam for a Nitrous 408 These heads and cam were put together by LME for a decent size shot for my LME 408.
LME ported 317 heads:
Ferrea 2.080" int/1.600" exh / 250cc / 67cc chamber
CV products custom guides
Manley dual springs
Manley titanium retainers, Manley locators and machined keepers, GM valve seals
Flow numbers:
Lift Intake Exhaust
.300 206 168
.400 266 209
.450 286 223
.500 304 231
.550 321 237
.600 335 240
.650 341 243
Cam Motion:
246/256 .633/645 114+4 LSA
This is a great combo for a 150+ shot. It does great N/A, but LOVES the nitrous!!!!!!!
The heads and cam has right around 300 miles on them.
I am going a different route, so my loss is your gain. $1600 plus shipping for both.
If you would like pics and/or more info, please pm me.
LME ported 317 heads:
Ferrea 2.080" int/1.600" exh / 250cc / 67cc chamber
CV products custom guides
Manley dual springs
Manley titanium retainers, Manley locators and machined keepers, GM valve seals
Flow numbers:
Lift Intake Exhaust
.300 206 168
.400 266 209
.450 286 223
.500 304 231
.550 321 237
.600 335 240
.650 341 243
Cam Motion:
246/256 .633/645 114+4 LSA
This is a great combo for a 150+ shot. It does great N/A, but LOVES the nitrous!!!!!!!
The heads and cam has right around 300 miles on them.
I am going a different route, so my loss is your gain. $1600 plus shipping for both. If you would like pics and/or more info, please pm me.
