FS: AFR 225cc Cylinder Heads, Comp Pro-Magnum Rockers, Nasty Performance Valve Covers
FS: AFR 225cc Cylinder Heads, Comp Pro-Magnum Rockers, Nasty Performance Valve Covers ALL PARTS SOLD
For sale:
SOLD
Comp Cams Pro Magnum 1.75 Ratio rockers, 830 miles were on the above listed AFR 225 heads. They are complete including Pro Magnum Rocker Arms™, guide plates, rocker studs, adjusting nuts and set screws. I paid $500 new for these.
SOLD
I paid over $600 for these Nasty Performance billet Polished Valve covers /w APS Billet Coil Brackets when I bought them /w add on10an breather fittings, add on billet oil cap, add bungs for coil brackets mounts
They have been used for 830 miles, look pretty good. They are in pretty nice shape, just normal used shape for being on for a little while. No damage or anything that wouldnt clean up with a repolish.
SOLD
AFR 225cc Part # 1630
CNC Ported /w 72cc combustion chambers
Like new, 830 miles, about 30-40 dyno pulls tuning the motor on the chassis dyno. They have never had any damage/problems of any type. Only removing because I am swapping to a LSX blocked motor and getting 6-head bolt heads. Heads have seen no nitrous at all, perfect used running shape.
ALSO I spent $500 on a Comp 921 valvespring & titanium retainer valve spring upgrade over the stuff that comes on the AFR heads. This is an ideal upgrade that I paid $2750 for plus shipping
I take normal mail payments or paypal (add 3% for paypal fees).
All prices are firm at the moment. If stuff hasnt sold in a week or two I may consider lowering the price
PM me with any questions or if you want them. Please do not call dibs as per ls1tech rules.
For sale:
SOLD
Comp Cams Pro Magnum 1.75 Ratio rockers, 830 miles were on the above listed AFR 225 heads. They are complete including Pro Magnum Rocker Arms™, guide plates, rocker studs, adjusting nuts and set screws. I paid $500 new for these.
SOLD
I paid over $600 for these Nasty Performance billet Polished Valve covers /w APS Billet Coil Brackets when I bought them /w add on10an breather fittings, add on billet oil cap, add bungs for coil brackets mounts
They have been used for 830 miles, look pretty good. They are in pretty nice shape, just normal used shape for being on for a little while. No damage or anything that wouldnt clean up with a repolish.
SOLD
AFR 225cc Part # 1630
CNC Ported /w 72cc combustion chambers
Like new, 830 miles, about 30-40 dyno pulls tuning the motor on the chassis dyno. They have never had any damage/problems of any type. Only removing because I am swapping to a LSX blocked motor and getting 6-head bolt heads. Heads have seen no nitrous at all, perfect used running shape.
ALSO I spent $500 on a Comp 921 valvespring & titanium retainer valve spring upgrade over the stuff that comes on the AFR heads. This is an ideal upgrade that I paid $2750 for plus shipping
I take normal mail payments or paypal (add 3% for paypal fees).
All prices are firm at the moment. If stuff hasnt sold in a week or two I may consider lowering the price
PM me with any questions or if you want them. Please do not call dibs as per ls1tech rules.
Last edited by LSInnovations; Jul 29, 2007 at 09:10 PM.
