FS: Diamond 11576 4.030" 408ci pistons
Thread Starter
High on diesel fumes
iTrader: (70)
Joined: Mar 2005
Posts: 12,333
Likes: 0
From: Phoenix, AZ
FS: Diamond 11576 4.030" 408ci pistons I have a used set (14k miles) that was custom cut for 1/16, 1/16, 3/16 rings. I went with a different set of heads on my new rebuild, and had to get a different set of pistons to make up the compression difference. There is nothing wrong with these pistons. Wrist pins and spiro-lock pin retainers are included.
Bore.....Stroke....Rod......C.D.....Weight.....Pin .................CC's
4.030...4.000.....6.125...1.115...420.........(.92 7x2.200)...-28.0cc
http://www.diamondracing.net/Diamond2007.pdf
PDF page 7 has all of the specs.
I paid about $750 for these new, I'd like to get $350 for them. Will post pics later.
EDIT**Sold!!**
Bore.....Stroke....Rod......C.D.....Weight.....Pin .................CC's
4.030...4.000.....6.125...1.115...420.........(.92 7x2.200)...-28.0cc
-Inboard style piston designed to clear most counterweights and reluctor wheels
-Forced induction applications up to 25lbs of boost. 2618 alloy
-Offset wrist pins for quiet operation
-Premium H-13 wrist pins included
-Top ring down = .300"
-Valve relief depth = .165" intake and .107" exhaust
-Forced induction applications up to 25lbs of boost. 2618 alloy
-Offset wrist pins for quiet operation
-Premium H-13 wrist pins included
-Top ring down = .300"
-Valve relief depth = .165" intake and .107" exhaust
PDF page 7 has all of the specs.
I paid about $750 for these new, I'd like to get $350 for them. Will post pics later.
EDIT**Sold!!**
Last edited by thunder550; Jul 17, 2007 at 02:36 AM.
Thread Starter
High on diesel fumes
iTrader: (70)
Joined: Mar 2005
Posts: 12,333
Likes: 0
From: Phoenix, AZ
I never had my truck dynoed with this setup, so I can't really answer that question. I did run a 12.74@106 in my truck though at 8 psi, if that gives you any idea.
