Have a few things still up for grabs

Have a Isky camshaft brand new has a 232, 242 dur at .50, 580, 590 lift on a 113 lobe sep 111 centerline up for grabs as well paid $450 for it want $350 went with a bigger cam for my 427.

Brand new Snow meth injection system with all the nozzles and lines, upgraded pump, and controller paid over $500 would like $400

Used LS6 intake looks brand new and never used with N2O ready to bolt on with new seals and all. Paid $380 would like to get $300

Brand new Procharger F1A still up for grabs never used still in box comes with 3 things of charger oil and 1 pulley. Paid 3200+ would like to get $2300sold

Set of 17x9 chrome Zr1 rims with brand new KDW tires with less than 500 miles on the tires 245/45/17s front 295/40/17s back and an extra set of 275/45/17s for the back as well all with 95% of thread never burned out on. Paid over 800 in tires alone would like to get $650 for all.

Complete PTS turbo system with upgrades, this is not an ebay kit like some are selling on this board this is a real PTS kit. All tubing is coated and wrapped so you dont have too. Only 500 miles on system used for mocking up now going with big cube motor and bigger turbo system. System comes with all this
*4 in core front mount intercooler, polished, 3in inlet and outletsold

*Stainless steel 3 inch intercooler piping all polished, couplers, and T-bolt clampssold

*Tial 50mm blow off with inodizing already had mounting boss welded on and brand new IAT sensor as wellsold

*a new Boss 150 amp alt and relocation bracket with required belt

*All hot parts all mandrel bent, coated by jethot, and wrapped with DEI wrap professionally wrap alone for system cost $350 for all of it extra wrap included as well

*T80GTS turbo by Jose at Forced inductions good for 1250 horsepower. Turbo is not loose in any way shape of form only used for 500 miles, only saw synthetic oil, no chipping of blades and spins very nicely. Started out as a T76GTS then was sent to Jose for upgrading to a better exhaust wheel and bigger 80mm s wheel.

*turbosmart 48mm wastegate

*Header type system will also include a set of new spark plug protector boots good too 2100 degrees continuous as well as a new set of Taylor race 409 wires with 1200 degree wire shielding.

*Also incldues a full 4 in custom mandrel bent exhaust sytem with a magnaflow muffler and 5 in tip looks really good kinda like a supra. Bolts right in and has a very deep rumble not to loud but will be noticed.

*Turbo blanket and 2 velcro pipe sheilds as well

Paid 4500 for just the basic system and have added over 2400 in extras such as full custom exhaust, tial blow off, turbosmart 48mm wastegate, wrapping, spark plug wires, sheilding, and protectors, 3 in stainless steel intercooler piping, etc etc. Total invested is $6900 would like to get $4000 for all willing to take the lose as I dont need this stuff around anymore and need the money to get the new twins coming for the 427.

I have a full air to water intercooler system brand new never used with large core, remote mount resevior, pump, new high pressure lines, intercooler piping, couplers, t-bolt clamps, and everything needed good for turbo systems running 25+ PSI and good too 1500hp. Paid $2100 would like to get $1200 out of it.

Willing to talk trades, and entertain offers but no lowballing as I paid for this and most is either brand new or barely used so understand that when making an offer thanks. All prices do not cover shipping that is extra and if you choose to use paypal then you also are responsible for the extra 3%

 

ls6 intake have the egr provision? if so ill take it

 

Heres a few more pics of stuff, all of this stuff is off the car now and ready to be shipped

 

far as i know No LS6 intake came with provisions for an EGR. you can drill a hole for it but the 01 and 02 TAs didnt have EGR either. Just an FYI

 

are you interested in selling just the turbo, BOV and wastegate??

i dont need the entire kit

 

so what would i have to do in order to make it work? does this come with the coolant lines?

 

If Ricks99Ls1 passes on the intake shoot me a PM I"ll take it!

 

coolant lines are not included but the stock ones will work just a little tighter we used em on my buddies car and didnt change the lines.

 

What kind of gains will the blower make at what psi? Also, does it come with piping, mounting bracket, etc?
Thanks

 

The F1A has enough airflow to make over 1200 hp, this is the head unit only I do have a brand new Jbracket, and I have a nice air to water intercooler that I could make a killer blower package outof but you'll need the crank pulley setup runs about 400.00. If your interested it would make a very powerful package good for almost a 1000 at the wheels. PM me if you want to work out a special package deal.

No dont want to sell the turbo kit off as parts to hard to get rid of that way but if you want to make me an offer I will entertain it as I have had a few guys ask if id sell the hot parts alone. PM me is the best way to get a hold a me

 

I'm invested in a little project now, but after it's said and done and if you still have it for sale, I'll count up my pennies and get back with you.
Thanks.

 

interested in selling the turbo blanket separately?

 

if its still around then Ill hang myself lol anyway at this present time not loing to seperate the turbo setup unless some good offers come my way that wil get me to the desired price I am asking.

 

Bandit let bruiser grab that intake, id love to buy it and a great deal, but i have some other things i have to take care of first, i apologize for the wait, bump for a great deal

 

No prob

 

more pics of various things wheels tires, and air to water system, rims are a little dirty but they look great

 

TTT for all you power hungry guys

 

TTT again for the late nighters

 

TTT for a good guy!
I know the turbo kit is a STEAL of a deal. If I was not in the middle of my turbo kit, i would pick this one up.

 

Thanks KC hope thats going well by the way