GEN III Iron LS1 408 bare block, and '02 LS1 Longblock
GEN III Iron LS1 408 bare block, and '02 LS1 Longblock ALL ITEMS ARE SPOKEN FOR
I have two big things for sale!!
Number one:
A 2002 LS1 from Kiley2481 from the www.horsepowerjunkies.com forum (Might have gotten his numbers wrong) Mike Kiley's car. Motor has about 23k miles on it. I have not installed it, or modified it in any way. He sold it to me, I bought it, ran into some financial trouble and now I need to sell it before I ever even installed it
What you're getting:
2002 LS1 basically stock, plus LS6 intake manifold, Stock LS1 Fbody Clutch AND Flywheel installed on motor.
What is missing from the motor:
These are the parts Mike kept for his build:
-intake manifold bolts
-valve covers
-oil pan
-Throttle body
-Sensors
All of these sensors and parts can be purchased from him for minimal expense if he still has 'em or from just about anyone on LS1tech.
It comes with a nice red engine stand to keep it up off the floor and according to Mayhem Motorsports outside of Raleigh NC, the motor was a stout one from the get-go. Over 310whp and being that it is basically brand new and low mileage. You can contact them for more info.
I purchased the motor for 1800 dollars and drove about 3 hours to pick it up. I am asking $1550 for everything mentioned (including the ls6 intake)completely unmolested from the day I bought it.
Number 2:
An Iron LS1 block already machined to .030 over to accomodate a 408 build that I half-heartedly started on. Block was purchased about 3 months ago from MR_PRESIDENT right here on LS1tech and was removed from a 2002 cadillac escalade with 25k miles on the odometer.
As Mr_President can attest, it is still in the same package that he shipped it to me with.
$650
SALE PENDING
MISC INFO:
I am local to southeastern North Carolina and would prefer a local pickup. I will gladly drive up to 100 miles for delivery for an extra 50 dollars (food and gas money for the drive back). This would include raleigh, fayetteville, Jacksonville, New Bern, Myrtle beach, etc. If you wanna meet me halfway I'll do it free of charge. I am also a member of Evolutionm.net and v8rx7forum.com (yeah yeah smelly little evos...) and I have a good trader rating in all of these places (cept rx7forum cause i havent sold anything there yet).
MODS I would like to post this thread in the local southeast forum as well. If this is not protocall or acceptable please delete the 2nd thread.
I have two big things for sale!!
Number one:
A 2002 LS1 from Kiley2481 from the www.horsepowerjunkies.com forum (Might have gotten his numbers wrong) Mike Kiley's car. Motor has about 23k miles on it. I have not installed it, or modified it in any way. He sold it to me, I bought it, ran into some financial trouble and now I need to sell it before I ever even installed it
What you're getting:
2002 LS1 basically stock, plus LS6 intake manifold, Stock LS1 Fbody Clutch AND Flywheel installed on motor.
What is missing from the motor:
These are the parts Mike kept for his build:
-intake manifold bolts
-valve covers
-oil pan
-Throttle body
-Sensors
All of these sensors and parts can be purchased from him for minimal expense if he still has 'em or from just about anyone on LS1tech.
It comes with a nice red engine stand to keep it up off the floor and according to Mayhem Motorsports outside of Raleigh NC, the motor was a stout one from the get-go. Over 310whp and being that it is basically brand new and low mileage. You can contact them for more info.
I purchased the motor for 1800 dollars and drove about 3 hours to pick it up. I am asking $1550 for everything mentioned (including the ls6 intake)completely unmolested from the day I bought it.
Number 2:
An Iron LS1 block already machined to .030 over to accomodate a 408 build that I half-heartedly started on. Block was purchased about 3 months ago from MR_PRESIDENT right here on LS1tech and was removed from a 2002 cadillac escalade with 25k miles on the odometer.
As Mr_President can attest, it is still in the same package that he shipped it to me with.
$650
SALE PENDING
MISC INFO:
I am local to southeastern North Carolina and would prefer a local pickup. I will gladly drive up to 100 miles for delivery for an extra 50 dollars (food and gas money for the drive back). This would include raleigh, fayetteville, Jacksonville, New Bern, Myrtle beach, etc. If you wanna meet me halfway I'll do it free of charge. I am also a member of Evolutionm.net and v8rx7forum.com (yeah yeah smelly little evos...) and I have a good trader rating in all of these places (cept rx7forum cause i havent sold anything there yet).
MODS I would like to post this thread in the local southeast forum as well. If this is not protocall or acceptable please delete the 2nd thread.
Last edited by kwman; Aug 10, 2007 at 07:38 AM.
Trending Topics
Whew, sorry about the late replies everyone. All pms have been responded to and I'll take more pictures in better lighting of the 408 tonight so you guys can see EXACTELY what you'll be getting. I figure they would be the best indicator of everything included.
If you guys have any questions about the 408, please PM Mr_President on here and I'm sure he'd be happy to answer any of them as hes a pretty cool guy. Anywho, I'll have some more pics up around noon tomorow, possibly a little later depending on my schedule. Thanks alot fellas.
-Kyle
If you guys have any questions about the 408, please PM Mr_President on here and I'm sure he'd be happy to answer any of them as hes a pretty cool guy. Anywho, I'll have some more pics up around noon tomorow, possibly a little later depending on my schedule. Thanks alot fellas.
-Kyle
Originally Posted by turboescalade
are you willing to ship to canada
Sale Pending on the 408 block. Nothing in stone yet, just wanted to keep you updated.
