Lemme see pics of your 17x11s and 315s.....
05-22-2003, 03:30 AM
#2
TECH Addict
Re: Lemme see pics of your 17x11s and 315s..... 
05-22-2003, 09:55 AM
#5
TECH Enthusiast
iTrader: (1)
Join Date: Mar 2002
Location: Sewell, NJ
Posts: 638
Likes: 0
Received 0 Likes
on
0 Posts
Re: Lemme see pics of your 17x11s and 315s..... not my car but i was looking around and ran into some pics here's the link http://community.webshots.com/album/37870542anWlVyenjoy
Trending Topics
05-22-2003, 08:36 PM
#9
TECH Addict
Re: Lemme see pics of your 17x11s and 315s..... Yeah, I did, those were the early shots, the new shots are here:
http://community.webshots.com/album/70899182ElHufR
http://community.webshots.com/album/70899182ElHufR
05-29-2003, 07:51 PM
#10
Teching In
Join Date: Feb 2002
Location: Plymouth, MI
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Re: Lemme see pics of your 17x11s and 315s..... Did you guys with covertibles have any trouble fitting the larger tires and rims on the rear? I have been told that there is not as much inner wheel well clearance because of the top mechanism. Is this true and if so, what did you do about it? Thanks.
02-11-2015, 11:57 AM
#19
On The Tree
Join Date: Apr 2013
Location: Temple, TX
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
Talk about a thread from the dead... took me a sec to figure out why none of the links were working... Cars look great though. 
Did you guys have to roll the fenders? BFH?
Did you guys have to roll the fenders? BFH?
02-14-2015, 08:42 PM
#20
TECH Fanatic
iTrader: (1)
Join Date: Jul 2005
Location: Earth
Posts: 1,682
Likes: 0
Received 0 Likes
on
0 Posts
I did all kinds of bfh, but didn't roll the fenders. As a result I still get the occasional slice job on the tires.
I did cut and trim the bumpstops, mostly for convenience. We don't have any Hills around here so I am not too worried about the car going airborne and the landing causing major damage because of the missing bumpstop.
I did cut and trim the bumpstops, mostly for convenience. We don't have any Hills around here so I am not too worried about the car going airborne and the landing causing major damage because of the missing bumpstop.
