Parting out 2000 Z28 with 33.5K miles.
08-15-2007, 02:46 PM
#1
On The Tree
Thread Starter
iTrader: (18)
Join Date: Dec 2006
Location: Twin Cities, MN
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
Parting out 2000 Z28 with 33.5K miles. The parts are from very clean 2000 Z28 that had 33,576 miles and never saw a winter. I removed every part and boxed it up to keep together. Now that I am starting on my LS1 Hybrid project, I need to make room in the garage. So the boxes of parts that I can't use from the car have to go.
I am keeping the brakes, e-brake lever, wire harnesses, dash, ac, hvac blower, lower console, pcm, engine, fuel lines, brake lines, fuel tank, wipers, steering column.
Last call!
Power mirrors $25 for the pair. They would need to be repainted as the car had a custom paint job. Some scuffs on them but could be reworked before painting.
T-tops $100 for the pair.
Automatic crossmember with transmission mount $10.
Passenger front turn signal $5.
The following are SOLD or GONE:
Front Sway bar
Rear sway bar
Carpet
rear seat
Rack and Pinion
Rear Hatch
Air pump setup with hose
Door panels
Exhaust system (manifolds, cats, Y-pipe, Muffler and tailpipe)
T-top holder for truck
Cargo Flip Cover
Sun visors
Rear latch mechanism
Panhard bars
Front speakers (pair)
Automatic transmission
Stock Torque Converter
T-top shades
K-member
Front shocks with springs
Rear shocks with springs
Rear axles (both)
Torque bar
T-top headliner; Black cloth
Passenger rear taillight
Upper Auto shifter console (ebony)
Shifter, **** and cable
Tranny cooler lines
Tranny dipstick tube
Torque arm bushing
Auto pedal setup
Flexplate
I will try to add pictures (or request for pics) and continue to add more parts as I sort through the boxes.
I am keeping the brakes, e-brake lever, wire harnesses, dash, ac, hvac blower, lower console, pcm, engine, fuel lines, brake lines, fuel tank, wipers, steering column.
Last call!
Power mirrors $25 for the pair. They would need to be repainted as the car had a custom paint job. Some scuffs on them but could be reworked before painting.
T-tops $100 for the pair.
Automatic crossmember with transmission mount $10.
Passenger front turn signal $5.
The following are SOLD or GONE:
Front Sway bar
Rear sway bar
Carpet
rear seat
Rack and Pinion
Rear Hatch
Air pump setup with hose
Door panels
Exhaust system (manifolds, cats, Y-pipe, Muffler and tailpipe)
T-top holder for truck
Cargo Flip Cover
Sun visors
Rear latch mechanism
Panhard bars
Front speakers (pair)
Automatic transmission
Stock Torque Converter
T-top shades
K-member
Front shocks with springs
Rear shocks with springs
Rear axles (both)
Torque bar
T-top headliner; Black cloth
Passenger rear taillight
Upper Auto shifter console (ebony)
Shifter, **** and cable
Tranny cooler lines
Tranny dipstick tube
Torque arm bushing
Auto pedal setup
Flexplate
I will try to add pictures (or request for pics) and continue to add more parts as I sort through the boxes.
Last edited by enganeer; 07-15-2008 at 10:49 AM. Reason: Sold parts
08-15-2007, 05:51 PM
#4
rear axles I'll take both rear axle's. I will paypal you the money plus the 3%. Is this with shipping if not how much to ship to 48858 Mt. pleasant, Mi.? gharnick@msn.com Also, did this car have traction control? If so I was told they would not work with non traction control cars. Thanks
Last edited by harnick3; 08-15-2007 at 06:03 PM. Reason: need more info
08-15-2007, 08:25 PM
#5
On The Tree
Thread Starter
iTrader: (18)
Join Date: Dec 2006
Location: Twin Cities, MN
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
This was a non-traction control car. I looked at the axles and can send pics of the bearing surfaces. The bearing surfaces look to have normal wear.
Trending Topics
08-18-2007, 09:28 PM
#17
On The Tree
Thread Starter
iTrader: (18)
Join Date: Dec 2006
Location: Twin Cities, MN
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
No the heads are not for sale. I think my wife would be very mad at me for taking her car apart to sell the heads. 
Check Corvette forums and the LS2 GTO forums as these have the 243 heads that came stock.
I have the t-top holders, dark gray was the color but I can check in the morning.
I am saving some of the interior parts (dash and console) for a Frankenstein interior project conversion with my El Camino.
I have the passenger side tail light. The drivers side was crunched.
Power locks and windows are still in the doors. Not sure but I think I will try to adapt them to my Elky. If not, I will post them for sale.
Check Corvette forums and the LS2 GTO forums as these have the 243 heads that came stock.I have the t-top holders, dark gray was the color but I can check in the morning.
I am saving some of the interior parts (dash and console) for a Frankenstein interior project conversion with my El Camino.
I have the passenger side tail light. The drivers side was crunched.
Power locks and windows are still in the doors. Not sure but I think I will try to adapt them to my Elky. If not, I will post them for sale.
Last edited by enganeer; 08-18-2007 at 09:45 PM.
08-19-2007, 01:35 PM
#20
Teching In
Join Date: Jan 2007
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts