Complete Dyno Tune Nitrous Kit W/ extras
Thread Starter
TECH Apprentice
iTrader: (2)
Joined: Jan 2006
Posts: 373
Likes: 0
From: Yelm, Washington
Complete Dyno Tune Nitrous Kit W/ extras I have a Dyno Tune Dry Nitrous Kit that I just pulled off my car that I am about to sell. This is a complete kit with EVERY thing you need install and run the kit. Here is what is included:
10 pound Dyno Tune Bottle
860 Spare Tire well mount plate
MSD Window Switch
SLP Lid pre-drilled for nozzel
Brand new in the box NKG TR6 plugs
Dyno Tune auto bottle heater
Jimmy Jams WOT switch, and the one that came with the kit
Jimmy Jams Center console switch panel W/ 4 switched and purge button
Feed Line
Line from the noid to the nozzel
100HP jet
K&N air filiter (needs to be re-oiled)
Pressure Gage on bottle
Bottle Brakets
Dyno Tune Noid with mounting bracket
Also will include the Traction control plate with two nitrous switched mounted on them from my TA.
Quick disconnect blow down tube from nitrous outlet, but do not have addaptor
If you have any question just let me know, the bottle has nitrous in it, don't know how much but it is holding about 900 pounds of pressure when it is 70 outside. Will ship but would like local pickup if I do ship the bottle will be emptyed. This is a great kit, but I am selling the car before I leave for Iraq so I don't need the kit any more. I am asking $500 OBO for the whole thing plus shipping if needed. I check this a couple times a day so if you PM me you will get a respons the with in a few hours. The pics are of the kit in the car I am in the process of removing it right now.
Shot with KODAK EASYSHARE CX7300 DIGITAL CAMERA at 2007-08-17
Shot with X400,D580Z,C460Z at 2007-08-17
Shot with KODAK EASYSHARE CX7300 DIGITAL CAMERA at 2007-08-17
The window switch still had the plastic protective thing on the screen when I took the pic that is what is peeling off in the pic
Shot with X400,D580Z,C460Z at 2007-08-17
I also have a shiter boot that was made for the car. I is real leather and was made for a 6 or 6 1/2 inch shifter, shoter than stock. DOES NOT COME WITH THE PLASTIC RING!!!!! 25 dollars shipped in the cont. us.
Shot with KODAK EASYSHARE CX7300 DIGITAL CAMERA at 2007-08-17
10 pound Dyno Tune Bottle
860 Spare Tire well mount plate
MSD Window Switch
SLP Lid pre-drilled for nozzel
Brand new in the box NKG TR6 plugs
Dyno Tune auto bottle heater
Jimmy Jams WOT switch, and the one that came with the kit
Jimmy Jams Center console switch panel W/ 4 switched and purge button
Feed Line
Line from the noid to the nozzel
100HP jet
K&N air filiter (needs to be re-oiled)
Pressure Gage on bottle
Bottle Brakets
Dyno Tune Noid with mounting bracket
Also will include the Traction control plate with two nitrous switched mounted on them from my TA.
Quick disconnect blow down tube from nitrous outlet, but do not have addaptor
If you have any question just let me know, the bottle has nitrous in it, don't know how much but it is holding about 900 pounds of pressure when it is 70 outside. Will ship but would like local pickup if I do ship the bottle will be emptyed. This is a great kit, but I am selling the car before I leave for Iraq so I don't need the kit any more. I am asking $500 OBO for the whole thing plus shipping if needed. I check this a couple times a day so if you PM me you will get a respons the with in a few hours. The pics are of the kit in the car I am in the process of removing it right now.
Shot with KODAK EASYSHARE CX7300 DIGITAL CAMERA at 2007-08-17
Shot with X400,D580Z,C460Z at 2007-08-17
Shot with KODAK EASYSHARE CX7300 DIGITAL CAMERA at 2007-08-17
The window switch still had the plastic protective thing on the screen when I took the pic that is what is peeling off in the pic
Shot with X400,D580Z,C460Z at 2007-08-17
I also have a shiter boot that was made for the car. I is real leather and was made for a 6 or 6 1/2 inch shifter, shoter than stock. DOES NOT COME WITH THE PLASTIC RING!!!!! 25 dollars shipped in the cont. us.
Shot with KODAK EASYSHARE CX7300 DIGITAL CAMERA at 2007-08-17
Last edited by Ramshaft; Aug 18, 2007 at 09:19 PM.
Thread Starter
TECH Apprentice
iTrader: (2)
Joined: Jan 2006
Posts: 373
Likes: 0
From: Yelm, Washington
Originally Posted by Vetal
Please consider lowering price 