243/LS6 heads, MTI Stealth II cam kit, ported LS6 intake, MTI Billet TB, GMMG springs

 
Thread Tools
 
Search this Thread
 
Old Aug 21, 2007 | 09:58 PM
  #1  
JustLucky's Avatar
Thread Starter
Staging Lane
iTrader: (6)
 
Joined: Jul 2005
Posts: 55
Likes: 0
From: NE Texas
Default 243/LS6 heads, MTI Stealth II cam kit, ported LS6 intake, MTI Billet TB, GMMG springs

I have several parts for sale listed below. I would prefer payment through PAYPAL as I am a verified Premier member and it just seems to make things easier. However, I am willing to accept USPS Money orders or a certified cashiers check. If you are interested in any item and have detailed questions please feel free to PM or e-mail me with any questions. I have provided links to detailed pictures of most parts but I can provide more pictures upon request. Please note that the pictures are not full size and you can view them fullsize by clicking on the picture in photobucket. Thanks in advance.

---------------------------------------------------------------------

1. SOLD Pair of 243/LS6 heads straight off of a 2005 Corvette with 7k miles. SOLD

---------------------------------------------------------------------


2. New/Never used MTI Stealth II cam and cam kit. MTI Stealth II cam specs are 224/220 .581/.581 116LSA. This cam will work in an automatic car with the stock stall converter or in a 6-spd car. This is a great sleeper cam and will improve horsepower and torque in all areas of the RPM band and will not sacrifice any low end power. I am selling this because as previously mentioned, I am selling my T/A which is what I bought this cam for.

STARTED NEW FOR SALE THREAD! and it SOLD!

---------------------------------------------------------------------

3. SOLD MTI Polished Billet Throttle Body SOLD

---------------------------------------------------------------------

4. SOLD Ported LS6 intake complete w/ intake and throttle body gaskets. SOLD

---------------------------------------------------------------------

5. SOLD New/Never Used GMMG Spec. Eibach Progressive Rate Lowering Springs. SOLD

---------------------------------------------------------------------

6. SOLD Stock Trans AM lower air box with filter holders - NON-Ramair SOLD

---------------------------------------------------------------------


7. New/Never used Noah Car Cover built just for the Trans AM with the high back wing. This is still new in the box. I do not have any pictures of it but I can take some pictures of the box if you would like with the part number on it. Bought brand new from afterthoughtsauto.com.

STARTED NEW FOR SALE THREAD! and it SOLD!

---------------------------------------------------------------------
ALL PRICES ARE OBO - FEEL FREE TO MAKE A REASONABLE OFFER - THANKS!

Please NOTE that I work nights and if I do no respond to your e-mail or PM during the middle of the day, I am not ignoring you or being slow, I just happen to be on a different schedule than most of the world. My PM box has been cleaned out. As stated before please feel free to e-mail me or PM me with any additional questions, concerns, or picture requests. I will try to respond quickly and keep those in-line updated on the item status. Again, I am PAYPAL verified premiere member and prefer that payment method. A tracking number will be provided upon shipment and I usually use UPS but if you prefer an alternate carrier I shall accomodate. If you happen to purchase more than one item I can work something out with you on the price as I have included shipping on all items. Thanks in advance.

Last edited by JustLucky; Dec 7, 2007 at 04:03 AM. Reason: added more pictures and fixed broken pictures links
Old Aug 22, 2007 | 06:32 PM
  #2  
JustLucky's Avatar
Thread Starter
Staging Lane
iTrader: (6)
 
Joined: Jul 2005
Posts: 55
Likes: 0
From: NE Texas
Default

TTT...

ALL PRICES ARE OBO - SO FEEL FREE TO MAKE ME SOME OFFERS...

I added some more pictures of the cam and cam kit.

I know someone needs a ported LS6 intake, LS6 heads, MTI cam, or be different with the GMMG springs, or a super nice $300 car cover for almost half the price...
Old Aug 22, 2007 | 06:46 PM
  #3  
Supajut's Avatar
On The Tree
iTrader: (59)
 
Joined: Feb 2005
Posts: 186
Likes: 0
From: Maine
Default

PM sent on intake
Old Aug 22, 2007 | 06:49 PM
  #4  
Supajut's Avatar
On The Tree
iTrader: (59)
 
Joined: Feb 2005
Posts: 186
Likes: 0
From: Maine
Default

Also, your pictures don't load...
Old Aug 23, 2007 | 09:29 PM
  #5  
JustLucky's Avatar
Thread Starter
Staging Lane
iTrader: (6)
 
Joined: Jul 2005
Posts: 55
Likes: 0
From: NE Texas
Default

ALL PM's REPLIED TO! - Thanks everyone!

I also fixed the broken picture links. Thanks for letting me know.

TTT for some offers... nothing is spoken for... MAKE ME AN OFFER...
Old Aug 23, 2007 | 10:02 PM
  #6  
CULATR's Avatar
TECH Fanatic
iTrader: (96)
 
Joined: Aug 2004
Posts: 1,181
Likes: 1
From: Ga
Default

pm sent!
Old Aug 23, 2007 | 10:18 PM
  #7  
JustLucky's Avatar
Thread Starter
Staging Lane
iTrader: (6)
 
Joined: Jul 2005
Posts: 55
Likes: 0
From: NE Texas
Default

Replied to your PM - Thanks

Originally Posted by CULATR
pm sent!
Old Aug 24, 2007 | 01:06 AM
  #8  
m1candelaa1's Avatar
On The Tree
iTrader: (13)
 
Joined: Apr 2006
Posts: 175
Likes: 0
From: SA TX.
Default

Would these heads work on my car? with set up?(see my sig) thanks
Old Aug 24, 2007 | 10:12 AM
  #9  
bjamick's Avatar
TECH Veteran
15 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (31)
 
Joined: May 2006
Posts: 4,218
Likes: 3
From: Birmingham AL.
Default

Who did the porting on the intake??
Old Aug 24, 2007 | 03:46 PM
  #10  
JustLucky's Avatar
Thread Starter
Staging Lane
iTrader: (6)
 
Joined: Jul 2005
Posts: 55
Likes: 0
From: NE Texas
Default

Originally Posted by m1candelaa1
Would these heads work on my car? with set up?(see my sig) thanks
Yes, they will work with the setup on your car. I just spoke with Jon at Texas Speed and he said that the LS6/243 heads will work in an LS1 equipped '99 Trans AM, with the MS3 cam and you will NOT have to flycut the pistons. The head porter advised that you use the stock gasket thickness and do not mill the heads any more than 15-thousandths. Hope this helps. Let me know if you are interested. PM sent.
Old Aug 24, 2007 | 03:46 PM
  #11  
JustLucky's Avatar
Thread Starter
Staging Lane
iTrader: (6)
 
Joined: Jul 2005
Posts: 55
Likes: 0
From: NE Texas
Default

Originally Posted by bjamick
Who did the porting on the intake??
PM sent! Thanks!
Old Aug 25, 2007 | 04:26 PM
  #12  
JustLucky's Avatar
Thread Starter
Staging Lane
iTrader: (6)
 
Joined: Jul 2005
Posts: 55
Likes: 0
From: NE Texas
Default

All PM's have been replied to. - Thanks everyone.

The LS6 intake is the only part with a sale pending...

Make me some offers...everything is or best offer!
Old Aug 25, 2007 | 08:08 PM
  #13  
JustLucky's Avatar
Thread Starter
Staging Lane
iTrader: (6)
 
Joined: Jul 2005
Posts: 55
Likes: 0
From: NE Texas
Default

TTT for some offers...

I reduced some of the prices as well...

Be sure to check my positive feedback on the corvetteforum under this same SN and on eBay under Irnman55...
Old Aug 26, 2007 | 07:48 AM
  #14  
JustLucky's Avatar
Thread Starter
Staging Lane
iTrader: (6)
 
Joined: Jul 2005
Posts: 55
Likes: 0
From: NE Texas
Default

ALL PRICES REDUCED - Bump for Sunday Morning!

Ported LS6 intake SOLD - Thanks!

No other items are pending - MAKE SOME OFFERS!
Old Aug 26, 2007 | 12:32 PM
  #15  
GMmexican's Avatar
TECH Fanatic
iTrader: (7)
 
Joined: Jan 2006
Posts: 1,607
Likes: 0
From: San Jose, CA
Default

Are the mti pushrods- 7.425? and will they work on stock ls2 heads?
Old Aug 26, 2007 | 06:36 PM
  #16  
JustLucky's Avatar
Thread Starter
Staging Lane
iTrader: (6)
 
Joined: Jul 2005
Posts: 55
Likes: 0
From: NE Texas
Default

Originally Posted by GMmexican
Are the mti pushrods- 7.425? and will they work on stock ls2 heads?
The MTI pushrods are 7.400" length and YES this cam and cam kit will work in an LS1 or LS2 without any problems. Hope this helps.

You can see the engravings and measurements on the pushrods here

PM sent...
Old Aug 26, 2007 | 08:48 PM
  #17  
JustLucky's Avatar
Thread Starter
Staging Lane
iTrader: (6)
 
Joined: Jul 2005
Posts: 55
Likes: 0
From: NE Texas
Default

ALL PM's REPLIED TO - THANKS

TTT for some offers... no other parts are pending - MAKE SOME OFFERS!
Old Aug 26, 2007 | 09:22 PM
  #18  
blu byu EH's Avatar
10 Second Club
15 Year Member
iTrader: (25)
 
Joined: Aug 2007
Posts: 728
Likes: 0
From: STL
Default

PM sent on the heads
Old Aug 26, 2007 | 09:40 PM
  #19  
JustLucky's Avatar
Thread Starter
Staging Lane
iTrader: (6)
 
Joined: Jul 2005
Posts: 55
Likes: 0
From: NE Texas
Default

Originally Posted by blu byu EH
PM sent on the heads
PM RETURNED... THANKS!
Old Aug 27, 2007 | 10:53 AM
  #20  
JustLucky's Avatar
Thread Starter
Staging Lane
iTrader: (6)
 
Joined: Jul 2005
Posts: 55
Likes: 0
From: NE Texas
Default

TTT for Monday and SOME OFFERS!

No items are currently pending - so make some offers - Thanks!



All times are GMT -5. The time now is 11:31 AM.