Hey guys I need this Transmission sold ASAP.

Its built to take the abuse, it just had some high dollar parts replaced and it has been inspected. Its ready to go right now.

Built 4L65e (Updated 4L60e) transmission

· 13 vane Ultra performance pump (includes anti-yo yo kit)
· GM 5 pinion planets front and rear
· Wide 2-4 carbon lined band
· Raybestos Z-Pak high-energy clutches in 3-4 pack
· Beast shell w/bearing
· 4L65 low roller clutch
· SS efi shift kit
· Billet Servo
· Bushing kit
· Spacer plate
· Seal & gasket kit
· Filter
· Updated accumulator pistons
· Deep GM pan
· Sonnax super hold 4th gear servo
· Vacuum Modulator for reliable line pressure
· Updated Reaction shaft with Torrington bearing

This thing is built to take the power! This tranny is good for up to 700 rwhp. I ran it to a 10.002 @ 138.5 mph in a 3500lb camaro. It will go 9’s in the right car. Compare at $2400+ else where, And you get to keep your original transmission. No down time. The tranny is out of the car and ready to ship out!

$1300 OBO + shipping

Also, I have a custom Cam-Motion Turbo cam.
It is a 226/222 Int/exh duration at .050 lift on a 115 degree lobe separation angle. It has about .580 lift intake and exhaust. And 4 degrees of advance ground in. This is a great cam for 346-370” turbo motor, I made 650+rwhp with it. It idles at 700 rpm and has a very slight lope. It makes a great all around daily driver/ weekend racer car.

$250 Shipped

 

Back up for the morning!

 

Would there be any problems with this cam and Cartek S2 heads? Any idea if they would work well together?

 

pm sent

 

Check your PMs bro

 

I'll take the cam if you can do $225 shipped.

 

Cam is $250 shipped, its already a smokin' deal.

Let me know!

Cam and Tranny still for sale!

Ryan K.

 

I have a fully build 4l60e and have 2-3 flare really bad.. Any of these problems with this trannyy..

Good lord.. 801hp with that tranny...

 

Ok I'll take the cam for $250 shipped. You take paypal?

 

Will the transmission work with a 97 z28? Or is it for ls1 only?

 

How much would it cost to ship the tranny to 67217?

Do you take paypal for it?

What is needed to make it fit?
I have a 2001 Conv. firebird that used to have a 3800, it now has a LS1 with the A4.

 

I do take paypal, shipping to a terminal near you for $125. My paypal is rkarasek@gmail.com .

It'll bolt right in to a firebird with out any mods...

Ryan K.

 

Money sent for cam. Let me know how you will be shipping so i can give you instructions.

 

Sorry, money returned, shipping to the US only.

Cam still for sale.

Ryan K.

 

Ok so couldn't you have told me how much extra shipping would be and I could have paid the extra? Or given you a US address to mail it too?

 

I sent you a couple of PM's wanting more information on the trans on 8-12 and 8-13, didn't hear back.... If it's still available could you let me know?

thanks,

Danv

( I live in WA also... )

 

PMs were full, please send your message again....

 

Check your PMs I gave you a US address to send it too if its still available.

 

Still waiting on a response...

 

whats the story with the transmission?

Just a few questions for you, who built it, how many miles/passes are on it, and are there any issues with it?